fix: sidebar toggle button

* chore: added field validations in serializer

* chore: added enum for roles

.env.example

@@ -15,12 +15,15 @@ RABBITMQ_USER="plane"
 RABBITMQ_PASSWORD="plane"
 RABBITMQ_VHOST="plane"
 
+LISTEN_HTTP_PORT=80
+LISTEN_HTTPS_PORT=443
+
 # AWS Settings
 AWS_REGION=""
 AWS_ACCESS_KEY_ID="access-key"
 AWS_SECRET_ACCESS_KEY="secret-key"
 AWS_S3_ENDPOINT_URL="http://plane-minio:9000"
-# Changing this requires change in the nginx.conf for uploads if using minio setup
+# Changing this requires change in the proxy config for uploads if using minio setup
 AWS_S3_BUCKET_NAME="uploads"
 # Maximum file upload limit
 FILE_SIZE_LIMIT=5242880
@@ -36,8 +39,15 @@ DOCKERIZED=1  # deprecated
 # set to 1 If using the pre-configured minio setup
 USE_MINIO=1
 
-# Nginx Configuration
-NGINX_PORT=80
+# If SSL Cert to be generated, set CERT_EMAIl="email <EMAIL_ADDRESS>"
+CERT_ACME_CA=https://acme-v02.api.letsencrypt.org/directory
+TRUSTED_PROXIES=0.0.0.0/0
+SITE_ADDRESS=:80
+CERT_EMAIL=
+
+# For DNS Challenge based certificate generation, set the CERT_ACME_DNS, CERT_EMAIL
+# CERT_ACME_DNS="acme_dns <CERT_DNS_PROVIDER> <CERT_DNS_PROVIDER_API_KEY>"
+CERT_ACME_DNS=
 
 # Force HTTPS for handling SSL Termination
 MINIO_ENDPOINT_SSL=0

.github/workflows/build-aio-base.yml

@@ -1,139 +0,0 @@
-name: Build AIO Base Image
-
-on:
-  workflow_dispatch:
-    inputs:
-      base_tag_name:
-        description: 'Base Tag Name'
-        required: false
-        default: ''
-
-env:
-  TARGET_BRANCH: ${{ github.ref_name }}
-
-jobs:
-  base_build_setup:
-    name: Build Preparation
-    runs-on: ubuntu-latest
-    outputs:
-      gh_branch_name: ${{ steps.set_env_variables.outputs.TARGET_BRANCH }}
-      gh_buildx_driver: ${{ steps.set_env_variables.outputs.BUILDX_DRIVER }}
-      gh_buildx_version: ${{ steps.set_env_variables.outputs.BUILDX_VERSION }}
-      gh_buildx_platforms: ${{ steps.set_env_variables.outputs.BUILDX_PLATFORMS }}
-      gh_buildx_endpoint: ${{ steps.set_env_variables.outputs.BUILDX_ENDPOINT }}
-      image_tag: ${{ steps.set_env_variables.outputs.IMAGE_TAG }}
-
-    steps:
-      - id: set_env_variables
-        name: Set Environment Variables
-        run: |
-          echo "TARGET_BRANCH=${{ env.TARGET_BRANCH }}" >> $GITHUB_OUTPUT
-
-          if [ "${{ github.event.inputs.base_tag_name }}" != "" ]; then
-            echo "IMAGE_TAG=${{ github.event.inputs.base_tag_name }}" >> $GITHUB_OUTPUT
-          elif [ "${{ env.TARGET_BRANCH }}" == "master" ]; then
-            echo "IMAGE_TAG=latest" >> $GITHUB_OUTPUT
-          elif [ "${{ env.TARGET_BRANCH }}" == "preview" ]; then
-              echo "IMAGE_TAG=preview" >> $GITHUB_OUTPUT
-          else
-            echo "IMAGE_TAG=develop" >> $GITHUB_OUTPUT
-          fi
-
-
-          if [ "${{ env.TARGET_BRANCH }}" == "master" ]; then
-            echo "BUILDX_DRIVER=cloud" >> $GITHUB_OUTPUT
-            echo "BUILDX_VERSION=lab:latest" >> $GITHUB_OUTPUT
-            echo "BUILDX_PLATFORMS=linux/amd64,linux/arm64" >> $GITHUB_OUTPUT
-            echo "BUILDX_ENDPOINT=makeplane/plane-dev" >> $GITHUB_OUTPUT
-          else
-            echo "BUILDX_DRIVER=docker-container" >> $GITHUB_OUTPUT
-            echo "BUILDX_VERSION=latest" >> $GITHUB_OUTPUT
-            echo "BUILDX_PLATFORMS=linux/amd64" >> $GITHUB_OUTPUT
-            echo "BUILDX_ENDPOINT=" >> $GITHUB_OUTPUT
-          fi
-
-      - id: checkout_files
-        name: Checkout Files
-        uses: actions/checkout@v4
-
-  full_base_build_push:
-    runs-on: ubuntu-latest
-    needs: [base_build_setup]
-    env:
-      BASE_IMG_TAG: makeplane/plane-aio-base:full-${{ needs.base_build_setup.outputs.image_tag }}
-      BUILDX_DRIVER: ${{ needs.base_build_setup.outputs.gh_buildx_driver }}
-      BUILDX_VERSION: ${{ needs.base_build_setup.outputs.gh_buildx_version }}
-      BUILDX_PLATFORMS: ${{ needs.base_build_setup.outputs.gh_buildx_platforms }}
-      BUILDX_ENDPOINT: ${{ needs.base_build_setup.outputs.gh_buildx_endpoint }}
-    steps:
-      - name: Check out the repo
-        uses: actions/checkout@v4
-
-      - name: Login to Docker Hub
-        uses: docker/login-action@v3
-        with:
-          username: ${{ secrets.DOCKERHUB_USERNAME }}
-          password: ${{ secrets.DOCKERHUB_TOKEN }}
-
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3
-        with:
-          driver: ${{ env.BUILDX_DRIVER }}
-          version: ${{ env.BUILDX_VERSION }}
-          endpoint: ${{ env.BUILDX_ENDPOINT }}
-
-      - name: Build and Push to Docker Hub
-        uses: docker/build-push-action@v6.9.0
-        with:
-          context: ./aio
-          file: ./aio/Dockerfile-base-full
-          platforms: ${{ env.BUILDX_PLATFORMS }}
-          tags: ${{ env.BASE_IMG_TAG }}
-          push: true
-          cache-from: type=gha
-          cache-to: type=gha,mode=max
-        env:
-          DOCKER_BUILDKIT: 1
-          DOCKER_USERNAME: ${{ secrets.DOCKERHUB_USERNAME }}
-          DOCKER_PASSWORD: ${{ secrets.DOCKERHUB_TOKEN }}
-
-  slim_base_build_push:
-    runs-on: ubuntu-latest
-    needs: [base_build_setup]
-    env:
-      BASE_IMG_TAG: makeplane/plane-aio-base:slim-${{ needs.base_build_setup.outputs.image_tag }}
-      BUILDX_DRIVER: ${{ needs.base_build_setup.outputs.gh_buildx_driver }}
-      BUILDX_VERSION: ${{ needs.base_build_setup.outputs.gh_buildx_version }}
-      BUILDX_PLATFORMS: ${{ needs.base_build_setup.outputs.gh_buildx_platforms }}
-      BUILDX_ENDPOINT: ${{ needs.base_build_setup.outputs.gh_buildx_endpoint }}
-    steps:
-      - name: Check out the repo
-        uses: actions/checkout@v4
-
-      - name: Login to Docker Hub
-        uses: docker/login-action@v3
-        with:
-          username: ${{ secrets.DOCKERHUB_USERNAME }}
-          password: ${{ secrets.DOCKERHUB_TOKEN }}
-
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3
-        with:
-          driver: ${{ env.BUILDX_DRIVER }}
-          version: ${{ env.BUILDX_VERSION }}
-          endpoint: ${{ env.BUILDX_ENDPOINT }}
-
-      - name: Build and Push to Docker Hub
-        uses: docker/build-push-action@v6.9.0
-        with:
-          context: ./aio
-          file: ./aio/Dockerfile-base-slim
-          platforms: ${{ env.BUILDX_PLATFORMS }}
-          tags: ${{ env.BASE_IMG_TAG }}
-          push: true
-          cache-from: type=gha
-          cache-to: type=gha,mode=max
-        env:
-          DOCKER_BUILDKIT: 1
-          DOCKER_USERNAME: ${{ secrets.DOCKERHUB_USERNAME }}
-          DOCKER_PASSWORD: ${{ secrets.DOCKERHUB_TOKEN }}

.github/workflows/build-aio-branch.yml

@@ -1,207 +0,0 @@
-name: Branch Build AIO
-
-on:
-  workflow_dispatch:
-    inputs:
-      full:
-        description: 'Run full build'
-        type: boolean
-        required: false
-        default: false
-      slim:
-        description: 'Run slim build'
-        type: boolean
-        required: false
-        default: false
-      base_tag_name:
-        description: 'Base Tag Name'
-        required: false
-        default: ''
-  release:
-    types: [released, prereleased]
-
-env:
-  TARGET_BRANCH: ${{ github.ref_name || github.event.release.target_commitish }}
-  FULL_BUILD_INPUT: ${{ github.event.inputs.full }}
-  SLIM_BUILD_INPUT: ${{ github.event.inputs.slim }}
-
-jobs:
-  branch_build_setup:
-    name: Build Setup
-    runs-on: ubuntu-latest
-    outputs:
-      gh_branch_name: ${{ steps.set_env_variables.outputs.TARGET_BRANCH }}
-      flat_branch_name: ${{ steps.set_env_variables.outputs.FLAT_BRANCH_NAME }}
-      gh_buildx_driver: ${{ steps.set_env_variables.outputs.BUILDX_DRIVER }}
-      gh_buildx_version: ${{ steps.set_env_variables.outputs.BUILDX_VERSION }}
-      gh_buildx_platforms: ${{ steps.set_env_variables.outputs.BUILDX_PLATFORMS }}
-      gh_buildx_endpoint: ${{ steps.set_env_variables.outputs.BUILDX_ENDPOINT }}
-      aio_base_tag: ${{ steps.set_env_variables.outputs.AIO_BASE_TAG }}
-      do_full_build: ${{ steps.set_env_variables.outputs.DO_FULL_BUILD }}
-      do_slim_build: ${{ steps.set_env_variables.outputs.DO_SLIM_BUILD }}
-
-    steps:
-      - id: set_env_variables
-        name: Set Environment Variables
-        run: |
-          if [ "${{ env.TARGET_BRANCH }}" == "master" ] || [ "${{ github.event_name }}" == "release" ]; then
-            echo "BUILDX_DRIVER=cloud" >> $GITHUB_OUTPUT
-            echo "BUILDX_VERSION=lab:latest" >> $GITHUB_OUTPUT
-            echo "BUILDX_PLATFORMS=linux/amd64,linux/arm64" >> $GITHUB_OUTPUT
-            echo "BUILDX_ENDPOINT=makeplane/plane-dev" >> $GITHUB_OUTPUT
-
-            echo "AIO_BASE_TAG=latest" >> $GITHUB_OUTPUT
-          else
-            echo "BUILDX_DRIVER=docker-container" >> $GITHUB_OUTPUT
-            echo "BUILDX_VERSION=latest" >> $GITHUB_OUTPUT
-            echo "BUILDX_PLATFORMS=linux/amd64" >> $GITHUB_OUTPUT
-            echo "BUILDX_ENDPOINT=" >> $GITHUB_OUTPUT
-
-            if [ "${{ github.event_name}}" == "workflow_dispatch" ] && [ "${{ github.event.inputs.base_tag_name }}" != "" ]; then
-              echo "AIO_BASE_TAG=${{ github.event.inputs.base_tag_name }}" >> $GITHUB_OUTPUT
-            elif [ "${{ env.TARGET_BRANCH }}" == "preview" ]; then
-              echo "AIO_BASE_TAG=preview" >> $GITHUB_OUTPUT
-            else
-              echo "AIO_BASE_TAG=develop" >> $GITHUB_OUTPUT
-            fi
-          fi
-          echo "TARGET_BRANCH=${{ env.TARGET_BRANCH }}" >> $GITHUB_OUTPUT
-
-          if [ "${{ env.FULL_BUILD_INPUT }}" == "true" ] || [ "${{github.event_name}}" == "push" ] || [ "${{github.event_name}}" == "release" ]; then
-            echo "DO_FULL_BUILD=true" >> $GITHUB_OUTPUT
-          else
-            echo "DO_FULL_BUILD=false" >> $GITHUB_OUTPUT
-          fi
-
-          if [ "${{ env.SLIM_BUILD_INPUT }}" == "true" ] || [ "${{github.event_name}}" == "push" ] || [ "${{github.event_name}}" == "release" ]; then
-            echo "DO_SLIM_BUILD=true" >> $GITHUB_OUTPUT
-          else
-            echo "DO_SLIM_BUILD=false" >> $GITHUB_OUTPUT
-          fi
-
-          FLAT_BRANCH_NAME=$(echo "${{ env.TARGET_BRANCH }}" | sed 's/[^a-zA-Z0-9]/-/g')
-          echo "FLAT_BRANCH_NAME=$FLAT_BRANCH_NAME" >> $GITHUB_OUTPUT
-
-      - id: checkout_files
-        name: Checkout Files
-        uses: actions/checkout@v4
-
-  full_build_push:
-    if: ${{ needs.branch_build_setup.outputs.do_full_build == 'true' }}
-    runs-on: ubuntu-22.04
-    needs: [branch_build_setup]
-    env:
-      BUILD_TYPE: full
-      AIO_BASE_TAG: ${{ needs.branch_build_setup.outputs.aio_base_tag }}
-      AIO_IMAGE_TAGS: makeplane/plane-aio:full-${{ needs.branch_build_setup.outputs.flat_branch_name }}
-      TARGET_BRANCH: ${{ needs.branch_build_setup.outputs.gh_branch_name }}
-      BUILDX_DRIVER: ${{ needs.branch_build_setup.outputs.gh_buildx_driver }}
-      BUILDX_VERSION: ${{ needs.branch_build_setup.outputs.gh_buildx_version }}
-      BUILDX_PLATFORMS: ${{ needs.branch_build_setup.outputs.gh_buildx_platforms }}
-      BUILDX_ENDPOINT: ${{ needs.branch_build_setup.outputs.gh_buildx_endpoint }}
-    steps:
-      - name: Set Docker Tag
-        run: |
-          if [ "${{ github.event_name }}" == "release" ]; then
-            TAG=makeplane/plane-aio:${{env.BUILD_TYPE}}-stable,makeplane/plane-aio:${{env.BUILD_TYPE}}-${{ github.event.release.tag_name }}
-          elif [ "${{ env.TARGET_BRANCH }}" == "master" ]; then
-            TAG=makeplane/plane-aio:${{env.BUILD_TYPE}}-latest
-          else
-            TAG=${{ env.AIO_IMAGE_TAGS }}
-          fi
-          echo "AIO_IMAGE_TAGS=${TAG}" >> $GITHUB_ENV
-
-      - name: Login to Docker Hub
-        uses: docker/login-action@v3
-        with:
-          username: ${{ secrets.DOCKERHUB_USERNAME }}
-          password: ${{ secrets.DOCKERHUB_TOKEN }}
-
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3
-        with:
-          driver: ${{ env.BUILDX_DRIVER }}
-          version: ${{ env.BUILDX_VERSION }}
-          endpoint: ${{ env.BUILDX_ENDPOINT }}
-
-      - name: Check out the repo
-        uses: actions/checkout@v4
-
-      - name: Build and Push to Docker Hub
-        uses: docker/build-push-action@v6.9.0
-        with:
-          context: .
-          file: ./aio/Dockerfile-app
-          platforms: ${{ env.BUILDX_PLATFORMS }}
-          tags: ${{ env.AIO_IMAGE_TAGS }}
-          push: true
-          build-args: |
-            BASE_TAG=${{ env.AIO_BASE_TAG }}
-            BUILD_TYPE=${{env.BUILD_TYPE}}
-          cache-from: type=gha
-          cache-to: type=gha,mode=max
-
-        env:
-          DOCKER_BUILDKIT: 1
-          DOCKER_USERNAME: ${{ secrets.DOCKERHUB_USERNAME }}
-          DOCKER_PASSWORD: ${{ secrets.DOCKERHUB_TOKEN }}
-
-  slim_build_push:
-    if: ${{ needs.branch_build_setup.outputs.do_slim_build == 'true' }}
-    runs-on: ubuntu-22.04
-    needs: [branch_build_setup]
-    env:
-      BUILD_TYPE: slim
-      AIO_BASE_TAG: ${{ needs.branch_build_setup.outputs.aio_base_tag }}
-      AIO_IMAGE_TAGS: makeplane/plane-aio:slim-${{ needs.branch_build_setup.outputs.flat_branch_name }}
-      TARGET_BRANCH: ${{ needs.branch_build_setup.outputs.gh_branch_name }}
-      BUILDX_DRIVER: ${{ needs.branch_build_setup.outputs.gh_buildx_driver }}
-      BUILDX_VERSION: ${{ needs.branch_build_setup.outputs.gh_buildx_version }}
-      BUILDX_PLATFORMS: ${{ needs.branch_build_setup.outputs.gh_buildx_platforms }}
-      BUILDX_ENDPOINT: ${{ needs.branch_build_setup.outputs.gh_buildx_endpoint }}
-    steps:
-      - name: Set Docker Tag
-        run: |
-          if [ "${{ github.event_name }}" == "release" ]; then
-            TAG=makeplane/plane-aio:${{env.BUILD_TYPE}}-stable,makeplane/plane-aio:${{env.BUILD_TYPE}}-${{ github.event.release.tag_name }}
-          elif [ "${{ env.TARGET_BRANCH }}" == "master" ]; then
-            TAG=makeplane/plane-aio:${{env.BUILD_TYPE}}-latest
-          else
-            TAG=${{ env.AIO_IMAGE_TAGS }}
-          fi
-          echo "AIO_IMAGE_TAGS=${TAG}" >> $GITHUB_ENV
-
-      - name: Login to Docker Hub
-        uses: docker/login-action@v3
-        with:
-          username: ${{ secrets.DOCKERHUB_USERNAME }}
-          password: ${{ secrets.DOCKERHUB_TOKEN }}
-
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3
-        with:
-          driver: ${{ env.BUILDX_DRIVER }}
-          version: ${{ env.BUILDX_VERSION }}
-          endpoint: ${{ env.BUILDX_ENDPOINT }}
-
-      - name: Check out the repo
-        uses: actions/checkout@v4
-
-      - name: Build and Push to Docker Hub
-        uses: docker/build-push-action@v6.9.0
-        with:
-          context: .
-          file: ./aio/Dockerfile-app
-          platforms: ${{ env.BUILDX_PLATFORMS }}
-          tags: ${{ env.AIO_IMAGE_TAGS }}
-          push: true
-          build-args: |
-            BASE_TAG=${{ env.AIO_BASE_TAG }}
-            BUILD_TYPE=${{env.BUILD_TYPE}}
-          cache-from: type=gha
-          cache-to: type=gha,mode=max
-
-        env:
-          DOCKER_BUILDKIT: 1
-          DOCKER_USERNAME: ${{ secrets.DOCKERHUB_USERNAME }}
-          DOCKER_PASSWORD: ${{ secrets.DOCKERHUB_TOKEN }}

.github/workflows/build-branch.yml

@@ -25,6 +25,11 @@ on:
         required: false
         default: false
         type: boolean
+      aio_build:
+        description: "Build for AIO docker image"
+        required: false
+        default: false
+        type: boolean
   push:
     branches:
       - preview
@@ -36,6 +41,7 @@ env:
   BUILD_TYPE: ${{ github.event.inputs.build_type }}
   RELEASE_VERSION: ${{ github.event.inputs.releaseVersion }}
   IS_PRERELEASE: ${{ github.event.inputs.isPrerelease }}
+  AIO_BUILD: ${{ github.event.inputs.aio_build }}
 
 jobs:
   branch_build_setup:
@@ -54,11 +60,13 @@ jobs:
       dh_img_live: ${{ steps.set_env_variables.outputs.DH_IMG_LIVE }}
       dh_img_backend: ${{ steps.set_env_variables.outputs.DH_IMG_BACKEND }}
       dh_img_proxy: ${{ steps.set_env_variables.outputs.DH_IMG_PROXY }}
+      dh_img_aio: ${{ steps.set_env_variables.outputs.DH_IMG_AIO }}
 
       build_type: ${{steps.set_env_variables.outputs.BUILD_TYPE}}
       build_release: ${{ steps.set_env_variables.outputs.BUILD_RELEASE }}
       build_prerelease: ${{ steps.set_env_variables.outputs.BUILD_PRERELEASE }}
       release_version: ${{ steps.set_env_variables.outputs.RELEASE_VERSION }}
+      aio_build: ${{ steps.set_env_variables.outputs.AIO_BUILD }}
 
     steps:
       - id: set_env_variables
@@ -84,12 +92,15 @@ jobs:
           echo "DH_IMG_LIVE=plane-live" >> $GITHUB_OUTPUT
           echo "DH_IMG_BACKEND=plane-backend" >> $GITHUB_OUTPUT
           echo "DH_IMG_PROXY=plane-proxy" >> $GITHUB_OUTPUT
+          echo "DH_IMG_AIO=plane-aio-community" >> $GITHUB_OUTPUT
 
           echo "BUILD_TYPE=${{env.BUILD_TYPE}}" >> $GITHUB_OUTPUT
           BUILD_RELEASE=false
           BUILD_PRERELEASE=false
           RELVERSION="latest"
 
+          BUILD_AIO=${{ env.AIO_BUILD }}
+
           if [ "${{ env.BUILD_TYPE }}" == "Release" ]; then
             FLAT_RELEASE_VERSION=$(echo "${{ env.RELEASE_VERSION }}" | sed 's/[^a-zA-Z0-9.-]//g')
             echo "FLAT_RELEASE_VERSION=${FLAT_RELEASE_VERSION}" >> $GITHUB_OUTPUT
@@ -108,10 +119,14 @@ jobs:
             if [ "${{ env.IS_PRERELEASE }}" == "true" ]; then
               BUILD_PRERELEASE=true
             fi
+
+            BUILD_AIO=true
           fi
+
           echo "BUILD_RELEASE=${BUILD_RELEASE}" >> $GITHUB_OUTPUT
           echo "BUILD_PRERELEASE=${BUILD_PRERELEASE}" >> $GITHUB_OUTPUT
           echo "RELEASE_VERSION=${RELVERSION}" >> $GITHUB_OUTPUT
+          echo "AIO_BUILD=${BUILD_AIO}" >> $GITHUB_OUTPUT
 
       - id: checkout_files
         name: Checkout Files
@@ -133,7 +148,7 @@ jobs:
           docker-image-owner: makeplane
           docker-image-name: ${{ needs.branch_build_setup.outputs.dh_img_admin }}
           build-context: .
-          dockerfile-path: ./admin/Dockerfile.admin
+          dockerfile-path: ./apps/admin/Dockerfile.admin
           buildx-driver: ${{ needs.branch_build_setup.outputs.gh_buildx_driver }}
           buildx-version: ${{ needs.branch_build_setup.outputs.gh_buildx_version }}
           buildx-platforms: ${{ needs.branch_build_setup.outputs.gh_buildx_platforms }}
@@ -155,7 +170,7 @@ jobs:
           docker-image-owner: makeplane
           docker-image-name: ${{ needs.branch_build_setup.outputs.dh_img_web }}
           build-context: .
-          dockerfile-path: ./web/Dockerfile.web
+          dockerfile-path: ./apps/web/Dockerfile.web
           buildx-driver: ${{ needs.branch_build_setup.outputs.gh_buildx_driver }}
           buildx-version: ${{ needs.branch_build_setup.outputs.gh_buildx_version }}
           buildx-platforms: ${{ needs.branch_build_setup.outputs.gh_buildx_platforms }}
@@ -177,7 +192,7 @@ jobs:
           docker-image-owner: makeplane
           docker-image-name: ${{ needs.branch_build_setup.outputs.dh_img_space }}
           build-context: .
-          dockerfile-path: ./space/Dockerfile.space
+          dockerfile-path: ./apps/space/Dockerfile.space
           buildx-driver: ${{ needs.branch_build_setup.outputs.gh_buildx_driver }}
           buildx-version: ${{ needs.branch_build_setup.outputs.gh_buildx_version }}
           buildx-platforms: ${{ needs.branch_build_setup.outputs.gh_buildx_platforms }}
@@ -199,13 +214,13 @@ jobs:
           docker-image-owner: makeplane
           docker-image-name: ${{ needs.branch_build_setup.outputs.dh_img_live }}
           build-context: .
-          dockerfile-path: ./live/Dockerfile.live
+          dockerfile-path: ./apps/live/Dockerfile.live
           buildx-driver: ${{ needs.branch_build_setup.outputs.gh_buildx_driver }}
           buildx-version: ${{ needs.branch_build_setup.outputs.gh_buildx_version }}
           buildx-platforms: ${{ needs.branch_build_setup.outputs.gh_buildx_platforms }}
           buildx-endpoint: ${{ needs.branch_build_setup.outputs.gh_buildx_endpoint }}
 
-  branch_build_push_apiserver:
+  branch_build_push_api:
     name: Build-Push API Server Docker Image
     runs-on: ubuntu-22.04
     needs: [branch_build_setup]
@@ -220,8 +235,8 @@ jobs:
           dockerhub-token: ${{ secrets.DOCKERHUB_TOKEN }}
           docker-image-owner: makeplane
           docker-image-name: ${{ needs.branch_build_setup.outputs.dh_img_backend }}
-          build-context: ./apiserver
-          dockerfile-path: ./apiserver/Dockerfile.api
+          build-context: ./apps/api
+          dockerfile-path: ./apps/api/Dockerfile.api
           buildx-driver: ${{ needs.branch_build_setup.outputs.gh_buildx_driver }}
           buildx-version: ${{ needs.branch_build_setup.outputs.gh_buildx_version }}
           buildx-platforms: ${{ needs.branch_build_setup.outputs.gh_buildx_platforms }}
@@ -242,13 +257,102 @@ jobs:
           dockerhub-token: ${{ secrets.DOCKERHUB_TOKEN }}
           docker-image-owner: makeplane
           docker-image-name: ${{ needs.branch_build_setup.outputs.dh_img_proxy }}
-          build-context: ./nginx
-          dockerfile-path: ./nginx/Dockerfile
+          build-context: ./apps/proxy
+          dockerfile-path: ./apps/proxy/Dockerfile.ce
           buildx-driver: ${{ needs.branch_build_setup.outputs.gh_buildx_driver }}
           buildx-version: ${{ needs.branch_build_setup.outputs.gh_buildx_version }}
           buildx-platforms: ${{ needs.branch_build_setup.outputs.gh_buildx_platforms }}
           buildx-endpoint: ${{ needs.branch_build_setup.outputs.gh_buildx_endpoint }}
 
+  branch_build_push_aio:
+    if: ${{ needs.branch_build_setup.outputs.aio_build == 'true' }}
+    name: Build-Push AIO Docker Image
+    runs-on: ubuntu-22.04
+    needs: [
+        branch_build_setup,
+        branch_build_push_admin,
+        branch_build_push_web,
+        branch_build_push_space,
+        branch_build_push_live,
+        branch_build_push_api,
+        branch_build_push_proxy
+      ]
+    steps:
+      - name: Checkout Files
+        uses: actions/checkout@v4
+
+      - name: Prepare AIO Assets
+        id: prepare_aio_assets
+        run: |
+          cd deployments/aio/community
+          
+          if [ "${{ needs.branch_build_setup.outputs.build_type }}" == "Release" ]; then
+            aio_version=${{ needs.branch_build_setup.outputs.release_version }}
+          else
+            aio_version=${{ needs.branch_build_setup.outputs.gh_branch_name }}
+          fi
+          bash ./build.sh --release $aio_version
+          echo "AIO_BUILD_VERSION=${aio_version}" >> $GITHUB_OUTPUT
+
+      - name: Upload AIO Assets
+        uses: actions/upload-artifact@v4
+        with:
+          path: ./deployments/aio/community/dist
+          name: aio-assets-dist
+
+      - name: AIO Build and Push
+        uses: makeplane/actions/build-push@v1.1.0
+        with:
+          build-release: ${{ needs.branch_build_setup.outputs.build_release }}
+          build-prerelease: ${{ needs.branch_build_setup.outputs.build_prerelease }}
+          release-version: ${{ needs.branch_build_setup.outputs.release_version }}
+          dockerhub-username: ${{ secrets.DOCKERHUB_USERNAME }}
+          dockerhub-token: ${{ secrets.DOCKERHUB_TOKEN }}
+          docker-image-owner: makeplane
+          docker-image-name: ${{ needs.branch_build_setup.outputs.dh_img_aio }}
+          build-context: ./deployments/aio/community
+          dockerfile-path: ./deployments/aio/community/Dockerfile
+          buildx-driver: ${{ needs.branch_build_setup.outputs.gh_buildx_driver }}
+          buildx-version: ${{ needs.branch_build_setup.outputs.gh_buildx_version }}
+          buildx-platforms: ${{ needs.branch_build_setup.outputs.gh_buildx_platforms }}
+          buildx-endpoint: ${{ needs.branch_build_setup.outputs.gh_buildx_endpoint }}
+          additional-assets: aio-assets-dist
+          additional-assets-dir: ./deployments/aio/community/dist
+          build-args: |
+            PLANE_VERSION=${{ steps.prepare_aio_assets.outputs.AIO_BUILD_VERSION }}
+
+  upload_build_assets:
+    name: Upload Build Assets
+    runs-on: ubuntu-22.04
+    needs: [branch_build_setup, branch_build_push_admin, branch_build_push_web, branch_build_push_space, branch_build_push_live, branch_build_push_api, branch_build_push_proxy]
+    steps:
+      - name: Checkout Files
+        uses: actions/checkout@v4
+
+      - name: Update Assets
+        run: |
+          if [ "${{ needs.branch_build_setup.outputs.build_type }}" == "Release" ]; then
+            REL_VERSION=${{ needs.branch_build_setup.outputs.release_version }}
+          else
+            REL_VERSION=${{ needs.branch_build_setup.outputs.gh_branch_name }}
+          fi
+
+          cp ./deployments/cli/community/install.sh deployments/cli/community/setup.sh
+          sed -i 's/${APP_RELEASE:-stable}/${APP_RELEASE:-'${REL_VERSION}'}/g' deployments/cli/community/docker-compose.yml
+          # sed -i 's/APP_RELEASE=stable/APP_RELEASE='${REL_VERSION}'/g' deployments/cli/community/variables.env
+
+      - name: Upload Assets
+        uses: actions/upload-artifact@v4
+        with:
+          name: community-assets
+          path: |
+            ./deployments/cli/community/setup.sh
+            ./deployments/cli/community/restore.sh
+            ./deployments/cli/community/restore-airgapped.sh
+            ./deployments/cli/community/docker-compose.yml
+            ./deployments/cli/community/variables.env
+            ./deployments/swarm/community/swarm.sh
+
   publish_release:
     if: ${{ needs.branch_build_setup.outputs.build_type == 'Release' }}
     name: Build Release
@@ -260,7 +364,7 @@ jobs:
         branch_build_push_web,
         branch_build_push_space,
         branch_build_push_live,
-        branch_build_push_apiserver,
+        branch_build_push_api,
         branch_build_push_proxy,
       ]
     env:
@@ -271,9 +375,9 @@ jobs:
 
       - name: Update Assets
         run: |
-          cp ./deploy/selfhost/install.sh deploy/selfhost/setup.sh
-          sed -i 's/${APP_RELEASE:-stable}/${APP_RELEASE:-'${REL_VERSION}'}/g' deploy/selfhost/docker-compose.yml
-          # sed -i 's/APP_RELEASE=stable/APP_RELEASE='${REL_VERSION}'/g' deploy/selfhost/variables.env
+          cp ./deployments/cli/community/install.sh deployments/cli/community/setup.sh
+          sed -i 's/${APP_RELEASE:-stable}/${APP_RELEASE:-'${REL_VERSION}'}/g' deployments/cli/community/docker-compose.yml
+          # sed -i 's/APP_RELEASE=stable/APP_RELEASE='${REL_VERSION}'/g' deployments/cli/community/variables.env
 
       - name: Create Release
         id: create_release
@@ -287,9 +391,10 @@ jobs:
           prerelease: ${{ env.IS_PRERELEASE }}
           generate_release_notes: true
           files: |
-            ${{ github.workspace }}/deploy/selfhost/setup.sh
-            ${{ github.workspace }}/deploy/selfhost/swarm.sh
-            ${{ github.workspace }}/deploy/selfhost/restore.sh
-            ${{ github.workspace }}/deploy/selfhost/restore-airgapped.sh
-            ${{ github.workspace }}/deploy/selfhost/docker-compose.yml
-            ${{ github.workspace }}/deploy/selfhost/variables.env
+            ${{ github.workspace }}/deployments/cli/community/setup.sh
+            ${{ github.workspace }}/deployments/cli/community/restore.sh
+            ${{ github.workspace }}/deployments/cli/community/restore-airgapped.sh
+            ${{ github.workspace }}/deployments/cli/community/docker-compose.yml
+            ${{ github.workspace }}/deployments/cli/community/variables.env
+            ${{ github.workspace }}/deployments/swarm/community/swarm.sh
+

.github/workflows/build-test-pull-request.yml

@@ -1,95 +0,0 @@
-name: Build and Lint on Pull Request
-
-on:
-  workflow_dispatch:
-  pull_request:
-    types: ["opened", "synchronize", "ready_for_review"]
-
-jobs:
-  lint-apiserver:
-    if: github.event.pull_request.draft == false
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: Set up Python
-        uses: actions/setup-python@v5
-        with:
-          python-version: "3.x" # Specify the Python version you need
-      - name: Install Pylint
-        run: python -m pip install ruff
-      - name: Install Apiserver Dependencies
-        run: cd apiserver && pip install -r requirements.txt
-      - name: Lint apiserver
-        run: ruff check --fix apiserver
-
-  lint-admin:
-    if: github.event.pull_request.draft == false
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: Setup Node.js
-        uses: actions/setup-node@v4
-        with:
-          node-version: 20.x
-      - run: yarn install
-      - run: yarn lint --filter=admin
-
-  lint-space:
-    if: github.event.pull_request.draft == false
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: Setup Node.js
-        uses: actions/setup-node@v4
-        with:
-          node-version: 20.x
-      - run: yarn install
-      - run: yarn lint --filter=space
-
-  lint-web:
-    if: github.event.pull_request.draft == false
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: Setup Node.js
-        uses: actions/setup-node@v4
-        with:
-          node-version: 20.x
-      - run: yarn install
-      - run: yarn lint --filter=web
-
-  build-admin:
-    needs: lint-admin
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: Setup Node.js
-        uses: actions/setup-node@v4
-        with:
-          node-version: 20.x
-      - run: yarn install
-      - run: yarn build --filter=admin
-
-  build-space:
-    needs: lint-space
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: Setup Node.js
-        uses: actions/setup-node@v4
-        with:
-          node-version: 20.x
-      - run: yarn install
-      - run: yarn build --filter=space
-
-  build-web:
-    needs: lint-web
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: Setup Node.js
-        uses: actions/setup-node@v4
-        with:
-          node-version: 20.x
-      - run: yarn install
-      - run: yarn build --filter=web

.github/workflows/pull-request-build-lint-api.yml

@@ -0,0 +1,30 @@
+name: Build and lint API
+
+on:
+  workflow_dispatch:
+  pull_request:
+    branches: ["preview"]
+    types: ["opened", "synchronize", "ready_for_review", "review_requested", "reopened"]
+    paths:
+      - "apps/api/**"
+
+jobs:
+  lint-api:
+    name: Lint API
+    runs-on: ubuntu-latest
+    timeout-minutes: 25
+    if: |
+      github.event.pull_request.draft == false &&
+      github.event.pull_request.requested_reviewers != null
+    steps:
+      - uses: actions/checkout@v4
+      - name: Set up Python
+        uses: actions/setup-python@v5
+        with:
+          python-version: "3.x"
+      - name: Install Pylint
+        run: python -m pip install ruff
+      - name: Install API Dependencies
+        run: cd apps/api && pip install -r requirements.txt
+      - name: Lint apps/api
+        run: ruff check --fix apps/api

.github/workflows/pull-request-build-lint-web-apps.yml

@@ -0,0 +1,43 @@
+name: Build and lint web apps
+
+on:
+  workflow_dispatch:
+  pull_request:
+    branches: ["preview"]
+    types: ["opened", "synchronize", "ready_for_review", "review_requested", "reopened"]
+    paths:
+      - "**.tsx?"
+      - "**.jsx?"
+      - "**.css"
+      - "**.json"
+      - "!apps/api/**"
+
+jobs:
+  build-and-lint:
+    name: Build and lint web apps
+    runs-on: ubuntu-latest
+    timeout-minutes: 25
+    if: |
+      github.event.pull_request.draft == false &&
+      github.event.pull_request.requested_reviewers != null
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          fetch-depth: 2
+
+      - name: Set up Node.js
+        uses: actions/setup-node@v4
+        with:
+          node-version-file: ".nvmrc"
+
+      - name: Install dependencies
+        run: yarn install --frozen-lockfile
+
+      - name: Build web apps
+        run: yarn run build
+
+      - name: Lint web apps
+        run: yarn run ci:lint
+
+

.nvmrc

@@ -0,0 +1 @@
+lts/jod

CONTRIBUTING.md

@@ -25,6 +25,7 @@ When opening a new issue, please use a clear and concise title that follows this
 - For documentation: `📘 Docs: [short description]`
 
 **Examples:**
+
 - `🐛 Bug: API token expiry time not saving correctly`
 - `📘 Docs: Clarify RAM requirement for local setup`
 - `🚀 Feature: Allow custom time selection for token expiration`
@@ -47,7 +48,7 @@ This helps us triage and manage issues more efficiently.
 
 The project is a monorepo, with backend api and frontend in a single repo.
 
-The backend is a django project which is kept inside apiserver
+The backend is a django project which is kept inside apps/api
 
 1. Clone the repo
 
@@ -105,11 +106,13 @@ To ensure consistency throughout the source code, please keep these rules in min
 - **Improve documentation** - fix incomplete or missing [docs](https://docs.plane.so/), bad wording, examples or explanations.
 
 ## Contributing to language support
+
 This guide is designed to help contributors understand how to add or update translations in the application.
 
 ### Understanding translation structure
 
 #### File organization
+
 Translations are organized by language in the locales directory. Each language has its own folder containing JSON files for translations. Here's how it looks:
 
 ```
@@ -122,7 +125,9 @@ packages/i18n/src/locales/
     └── [language]/
         └── translations.json
 ```
+
 #### Nested structure
+
 To keep translations organized, we use a nested structure for keys. This makes it easier to manage and locate specific translations. For example:
 
 ```json
@@ -137,32 +142,37 @@ To keep translations organized, we use a nested structure for keys. This makes i
 ```
 
 ### Translation formatting guide
+
 We use [IntlMessageFormat](https://formatjs.github.io/docs/intl-messageformat/) to handle dynamic content, such as variables and pluralization. Here's how to format your translations:
 
 #### Examples
+
 - **Simple variables**
-    ```json
-    {
+
+  ```json
+  {
     "greeting": "Hello, {name}!"
-    }
-    ```
+  }
+  ```
 
 - **Pluralization**
-    ```json
-    {
+  ```json
+  {
     "items": "{count, plural, one {Work item} other {Work items}}"
-    }
-    ```
+  }
+  ```
 
 ### Contributing guidelines
 
 #### Updating existing translations
+
 1. Locate the key in `locales/<language>/translations.json`.
 
 2. Update the value while ensuring the key structure remains intact.
 3. Preserve any existing ICU formats (e.g., variables, pluralization).
 
 #### Adding new translation keys
+
 1. When introducing a new key, ensure it is added to **all** language files, even if translations are not immediately available. Use English as a placeholder if needed.
 
 2. Keep the nesting structure consistent across all languages.
@@ -170,48 +180,48 @@ We use [IntlMessageFormat](https://formatjs.github.io/docs/intl-messageformat/)
 3. If the new key requires dynamic content (e.g., variables or pluralization), ensure the ICU format is applied uniformly across all languages.
 
 ### Adding new languages
+
 Adding a new language involves several steps to ensure it integrates seamlessly with the project. Follow these instructions carefully:
 
-1. **Update type definitions**
-Add the new language to the TLanguage type in the language definitions file:
+1.  **Update type definitions**
+    Add the new language to the TLanguage type in the language definitions file:
 
-    ```typescript
-    // types/language.ts
-    export type TLanguage = "en" | "fr" | "your-lang";
-    ```
+```ts
+      // packages/i18n/src/types/language.ts
+      export type TLanguage = "en" | "fr" | "your-lang";
+```
 
-2. **Add language configuration**
-Include the new language in the list of supported languages:
+1.  **Add language configuration**
+    Include the new language in the list of supported languages:
+```ts
+      // packages/i18n/src/constants/language.ts
+      export const SUPPORTED_LANGUAGES: ILanguageOption[] = [
+      { label: "English", value: "en" },
+      { label: "Your Language", value: "your-lang" }
+      ];
+```
 
-    ```typescript
-    // constants/language.ts
-    export const SUPPORTED_LANGUAGES: ILanguageOption[] = [
-    { label: "English", value: "en" },
-    { label: "Your Language", value: "your-lang" }
-    ];
-    ```
-
-3. **Create translation files**
-    1.  Create a new folder for your language under locales (e.g., `locales/your-lang/`).
+2.  **Create translation files**
+    1. Create a new folder for your language under locales (e.g., `locales/your-lang/`).
 
     2. Add a `translations.json` file inside the folder.
 
     3. Copy the structure from an existing translation file and translate all keys.
 
-4. **Update import logic**
-Modify the language import logic to include your new language:
-
-    ```typescript
-    private importLanguageFile(language: TLanguage): Promise<any> {
-    switch (language) {
-        case "your-lang":
-        return import("../locales/your-lang/translations.json");
-        // ...
-    }
-    }
-    ```
+3.  **Update import logic**
+    Modify the language import logic to include your new language:
+```ts
+      private importLanguageFile(language: TLanguage): Promise<any> {
+      switch (language) {
+          case "your-lang":
+          return import("../locales/your-lang/translations.json");
+          // ...
+      }
+      }
+```
 
 ### Quality checklist
+
 Before submitting your contribution, please ensure the following:
 
 - All translation keys exist in every language file.
@@ -222,6 +232,7 @@ Before submitting your contribution, please ensure the following:
 - There are no missing or untranslated keys.
 
 #### Pro tips
+
 - When in doubt, refer to the English translations for context.
 - Verify pluralization works with different numbers.
 - Ensure dynamic values (e.g., `{name}`) are correctly interpolated.

ENV_SETUP.md

@@ -1,88 +0,0 @@
-# Environment Variables
-
-Environment variables are distributed in various files. Please refer them carefully.
-
-## {PROJECT_FOLDER}/.env
-
-File is available in the project root folder​
-
-```
-# Database Settings
-POSTGRES_USER="plane"
-POSTGRES_PASSWORD="plane"
-POSTGRES_DB="plane"
-PGDATA="/var/lib/postgresql/data"
-# Redis Settings
-REDIS_HOST="plane-redis"
-REDIS_PORT="6379"
-# AWS Settings
-AWS_REGION=""
-AWS_ACCESS_KEY_ID="access-key"
-AWS_SECRET_ACCESS_KEY="secret-key"
-AWS_S3_ENDPOINT_URL="http://plane-minio:9000"
-# Changing this requires change in the nginx.conf for uploads if using minio setup
-AWS_S3_BUCKET_NAME="uploads"
-# Maximum file upload limit
-FILE_SIZE_LIMIT=5242880
-# GPT settings
-OPENAI_API_BASE="https://api.openai.com/v1" # deprecated
-OPENAI_API_KEY="sk-" # deprecated
-GPT_ENGINE="gpt-3.5-turbo" # deprecated
-# Settings related to Docker
-DOCKERIZED=1  # deprecated
-# set to 1 If using the pre-configured minio setup
-USE_MINIO=1
-# Nginx Configuration
-NGINX_PORT=80
-```
-
-## {PROJECT_FOLDER}/apiserver/.env
-
-```
-# Backend
-# Debug value for api server use it as 0 for production use
-DEBUG=0
-CORS_ALLOWED_ORIGINS="http://localhost"
-# Database Settings
-POSTGRES_USER="plane"
-POSTGRES_PASSWORD="plane"
-POSTGRES_HOST="plane-db"
-POSTGRES_DB="plane"
-POSTGRES_PORT=5432
-DATABASE_URL=postgresql://${POSTGRES_USER}:${POSTGRES_PASSWORD}@${POSTGRES_HOST}:${POSTGRES_PORT}/${POSTGRES_DB}
-# Redis Settings
-REDIS_HOST="plane-redis"
-REDIS_PORT="6379"
-REDIS_URL="redis://${REDIS_HOST}:6379/"
-# AWS Settings
-AWS_REGION=""
-AWS_ACCESS_KEY_ID="access-key"
-AWS_SECRET_ACCESS_KEY="secret-key"
-AWS_S3_ENDPOINT_URL="http://plane-minio:9000"
-# Changing this requires change in the nginx.conf for uploads if using minio setup
-AWS_S3_BUCKET_NAME="uploads"
-# Maximum file upload limit
-FILE_SIZE_LIMIT=5242880
-# Settings related to Docker
-DOCKERIZED=1 # deprecated
-# set to 1 If using the pre-configured minio setup
-USE_MINIO=1
-# Nginx Configuration
-NGINX_PORT=80
-# Email redirections and minio domain settings
-WEB_URL="http://localhost"
-# Gunicorn Workers
-GUNICORN_WORKERS=2
-# Base URLs
-ADMIN_BASE_URL=
-SPACE_BASE_URL=
-APP_BASE_URL=
-SECRET_KEY="gxoytl7dmnc1y37zahah820z5iq3iozu38cnfjtu3yaau9cd9z"
-```
-
-## Updates​
-
-- The naming convention for containers and images has been updated.
-- The plane-worker image will no longer be maintained, as it has been merged with plane-backend.
-- The Tiptap pro-extension dependency has been removed, eliminating the need for Tiptap API keys.
-- The image name for Plane deployment has been changed to plane-space.

admin/app/email/page.tsx

@@ -1,48 +0,0 @@
-"use client";
-
-import { observer } from "mobx-react";
-import useSWR from "swr";
-import { Loader } from "@plane/ui";
-// hooks
-import { useInstance } from "@/hooks/store";
-// components
-import { InstanceEmailForm } from "./email-config-form";
-
-const InstanceEmailPage = observer(() => {
-  // store
-  const { fetchInstanceConfigurations, formattedConfig } = useInstance();
-
-  useSWR("INSTANCE_CONFIGURATIONS", () => fetchInstanceConfigurations());
-
-  return (
-    <>
-      <div className="relative container mx-auto w-full h-full p-4 py-4 space-y-6 flex flex-col">
-        <div className="border-b border-custom-border-100 mx-4 py-4 space-y-1 flex-shrink-0">
-          <div className="text-xl font-medium text-custom-text-100">Secure emails from your own instance</div>
-          <div className="text-sm font-normal text-custom-text-300">
-            Plane can send useful emails to you and your users from your own instance without talking to the Internet.
-            <div className="text-sm font-normal text-custom-text-300">
-              Set it up below and please test your settings before you save them.&nbsp;
-              <span className="text-red-400">Misconfigs can lead to email bounces and errors.</span>
-            </div>
-          </div>
-        </div>
-        <div className="flex-grow overflow-hidden overflow-y-scroll vertical-scrollbar scrollbar-md px-4">
-          {formattedConfig ? (
-            <InstanceEmailForm config={formattedConfig} />
-          ) : (
-            <Loader className="space-y-10">
-              <Loader.Item height="50px" width="75%" />
-              <Loader.Item height="50px" width="75%" />
-              <Loader.Item height="50px" width="40%" />
-              <Loader.Item height="50px" width="40%" />
-              <Loader.Item height="50px" width="20%" />
-            </Loader>
-          )}
-        </div>
-      </div>
-    </>
-  );
-});
-
-export default InstanceEmailPage;

admin/app/layout.tsx

@@ -1,47 +0,0 @@
-"use client";
-
-import { ReactNode } from "react";
-import { ThemeProvider, useTheme } from "next-themes";
-import { SWRConfig } from "swr";
-// plane imports
-import { ADMIN_BASE_PATH, DEFAULT_SWR_CONFIG } from "@plane/constants";
-import { Toast } from "@plane/ui";
-import { resolveGeneralTheme } from "@plane/utils";
-// lib
-import { InstanceProvider } from "@/lib/instance-provider";
-import { StoreProvider } from "@/lib/store-provider";
-import { UserProvider } from "@/lib/user-provider";
-// styles
-import "@/styles/globals.css";
-
-const ToastWithTheme = () => {
-  const { resolvedTheme } = useTheme();
-  return <Toast theme={resolveGeneralTheme(resolvedTheme)} />;
-};
-
-export default function RootLayout({ children }: { children: ReactNode }) {
-  const ASSET_PREFIX = ADMIN_BASE_PATH;
-  return (
-    <html lang="en">
-      <head>
-        <link rel="apple-touch-icon" sizes="180x180" href={`${ASSET_PREFIX}/favicon/apple-touch-icon.png`} />
-        <link rel="icon" type="image/png" sizes="32x32" href={`${ASSET_PREFIX}/favicon/favicon-32x32.png`} />
-        <link rel="icon" type="image/png" sizes="16x16" href={`${ASSET_PREFIX}/favicon/favicon-16x16.png`} />
-        <link rel="manifest" href={`${ASSET_PREFIX}/site.webmanifest.json`} />
-        <link rel="shortcut icon" href={`${ASSET_PREFIX}/favicon/favicon.ico`} />
-      </head>
-      <body className={`antialiased`}>
-        <ThemeProvider themes={["light", "dark"]} defaultTheme="system" enableSystem>
-          <ToastWithTheme />
-          <SWRConfig value={DEFAULT_SWR_CONFIG}>
-            <StoreProvider>
-              <InstanceProvider>
-                <UserProvider>{children}</UserProvider>
-              </InstanceProvider>
-            </StoreProvider>
-          </SWRConfig>
-        </ThemeProvider>
-      </body>
-    </html>
-  );
-}

admin/app/page.tsx

@@ -1,30 +0,0 @@
-import { Metadata } from "next";
-// components
-import { InstanceSignInForm } from "@/components/login";
-// layouts
-import { DefaultLayout } from "@/layouts/default-layout";
-
-export const metadata: Metadata = {
-  title: "Plane | Simple, extensible, open-source project management tool.",
-  description:
-    "Open-source project management tool to manage work items, sprints, and product roadmaps with peace of mind.",
-  openGraph: {
-    title: "Plane | Simple, extensible, open-source project management tool.",
-    description:
-      "Open-source project management tool to manage work items, sprints, and product roadmaps with peace of mind.",
-    url: "https://plane.so/",
-  },
-  keywords:
-    "software development, customer feedback, software, accelerate, code management, release management, project management, work items tracking, agile, scrum, kanban, collaboration",
-  twitter: {
-    site: "@planepowers",
-  },
-};
-
-export default async function LoginPage() {
-  return (
-    <DefaultLayout>
-      <InstanceSignInForm />
-    </DefaultLayout>
-  );
-}

admin/ce/components/authentication/authentication-modes.tsx

@@ -1,70 +0,0 @@
-import { observer } from "mobx-react";
-import Image from "next/image";
-import { useTheme } from "next-themes";
-// types
-import {
-  TGetBaseAuthenticationModeProps,
-  TInstanceAuthenticationMethodKeys,
-  TInstanceAuthenticationModes,
-} from "@plane/types";
-// components
-import { AuthenticationMethodCard } from "@/components/authentication";
-// helpers
-import { getBaseAuthenticationModes } from "@/lib/auth-helpers";
-// plane admin components
-import { UpgradeButton } from "@/plane-admin/components/common";
-// images
-import OIDCLogo from "@/public/logos/oidc-logo.svg";
-import SAMLLogo from "@/public/logos/saml-logo.svg";
-
-export type TAuthenticationModeProps = {
-  disabled: boolean;
-  updateConfig: (key: TInstanceAuthenticationMethodKeys, value: string) => void;
-};
-
-// Authentication methods
-export const getAuthenticationModes: (props: TGetBaseAuthenticationModeProps) => TInstanceAuthenticationModes[] = ({
-  disabled,
-  updateConfig,
-  resolvedTheme,
-}) => [
-  ...getBaseAuthenticationModes({ disabled, updateConfig, resolvedTheme }),
-  {
-    key: "oidc",
-    name: "OIDC",
-    description: "Authenticate your users via the OpenID Connect protocol.",
-    icon: <Image src={OIDCLogo} height={22} width={22} alt="OIDC Logo" />,
-    config: <UpgradeButton />,
-    unavailable: true,
-  },
-  {
-    key: "saml",
-    name: "SAML",
-    description: "Authenticate your users via the Security Assertion Markup Language protocol.",
-    icon: <Image src={SAMLLogo} height={22} width={22} alt="SAML Logo" className="pl-0.5" />,
-    config: <UpgradeButton />,
-    unavailable: true,
-  },
-];
-
-export const AuthenticationModes: React.FC<TAuthenticationModeProps> = observer((props) => {
-  const { disabled, updateConfig } = props;
-  // next-themes
-  const { resolvedTheme } = useTheme();
-
-  return (
-    <>
-      {getAuthenticationModes({ disabled, updateConfig, resolvedTheme }).map((method) => (
-        <AuthenticationMethodCard
-          key={method.key}
-          name={method.name}
-          description={method.description}
-          icon={method.icon}
-          config={method.config}
-          disabled={disabled}
-          unavailable={method.unavailable}
-        />
-      ))}
-    </>
-  );
-});

admin/core/components/admin-sidebar/index.ts

@@ -1,5 +0,0 @@
-export * from "./root";
-export * from "./help-section";
-export * from "./sidebar-menu";
-export * from "./sidebar-dropdown";
-export * from "./sidebar-menu-hamburger-toogle";

admin/core/components/admin-sidebar/sidebar-menu-hamburger-toogle.tsx

@@ -1,20 +0,0 @@
-"use client";
-
-import { FC } from "react";
-import { observer } from "mobx-react";
-// hooks
-import { Menu } from "lucide-react";
-import { useTheme } from "@/hooks/store";
-// icons
-
-export const SidebarHamburgerToggle: FC = observer(() => {
-  const { isSidebarCollapsed, toggleSidebar } = useTheme();
-  return (
-    <div
-      className="w-7 h-7 rounded flex justify-center items-center bg-custom-background-80 transition-all hover:bg-custom-background-90 cursor-pointer group md:hidden"
-      onClick={() => toggleSidebar(!isSidebarCollapsed)}
-    >
-      <Menu size={14} className="text-custom-text-200 group-hover:text-custom-text-100 transition-all" />
-    </div>
-  );
-});

admin/core/components/authentication/index.ts

@@ -1,7 +0,0 @@
-export * from "./auth-banner";
-export * from "./email-config-switch";
-export * from "./password-config-switch";
-export * from "./authentication-method-card";
-export * from "./gitlab-config";
-export * from "./github-config";
-export * from "./google-config";

admin/core/components/common/index.ts

@@ -1,10 +0,0 @@
-export * from "./breadcrumb-link";
-export * from "./confirm-discard-modal";
-export * from "./controller-input";
-export * from "./copy-field";
-export * from "./password-strength-meter";
-export * from "./banner";
-export * from "./empty-state";
-export * from "./logo-spinner";
-export * from "./page-header";
-export * from "./code-block";

admin/core/components/common/password-strength-meter.tsx

@@ -1,89 +0,0 @@
-"use client";
-
-import { FC, useMemo } from "react";
-// plane internal packages
-import { E_PASSWORD_STRENGTH } from "@plane/constants";
-import { cn, getPasswordStrength } from "@plane/utils";
-
-type TPasswordStrengthMeter = {
-  password: string;
-  isFocused?: boolean;
-};
-
-export const PasswordStrengthMeter: FC<TPasswordStrengthMeter> = (props) => {
-  const { password, isFocused = false } = props;
-  // derived values
-  const strength = useMemo(() => getPasswordStrength(password), [password]);
-  const strengthBars = useMemo(() => {
-    switch (strength) {
-      case E_PASSWORD_STRENGTH.EMPTY: {
-        return {
-          bars: [`bg-custom-text-100`, `bg-custom-text-100`, `bg-custom-text-100`],
-          text: "Please enter your password.",
-          textColor: "text-custom-text-100",
-        };
-      }
-      case E_PASSWORD_STRENGTH.LENGTH_NOT_VALID: {
-        return {
-          bars: [`bg-red-500`, `bg-custom-text-100`, `bg-custom-text-100`],
-          text: "Password length should me more than 8 characters.",
-          textColor: "text-red-500",
-        };
-      }
-      case E_PASSWORD_STRENGTH.STRENGTH_NOT_VALID: {
-        return {
-          bars: [`bg-red-500`, `bg-custom-text-100`, `bg-custom-text-100`],
-          text: "Password is weak.",
-          textColor: "text-red-500",
-        };
-      }
-      case E_PASSWORD_STRENGTH.STRENGTH_VALID: {
-        return {
-          bars: [`bg-green-500`, `bg-green-500`, `bg-green-500`],
-          text: "Password is strong.",
-          textColor: "text-green-500",
-        };
-      }
-      default: {
-        return {
-          bars: [`bg-custom-text-100`, `bg-custom-text-100`, `bg-custom-text-100`],
-          text: "Please enter your password.",
-          textColor: "text-custom-text-100",
-        };
-      }
-    }
-  }, [strength]);
-
-  const isPasswordMeterVisible = isFocused ? true : strength === E_PASSWORD_STRENGTH.STRENGTH_VALID ? false : true;
-
-  if (!isPasswordMeterVisible) return <></>;
-  return (
-    <div className="w-full space-y-2 pt-2">
-      <div className="space-y-1.5">
-        <div className="relative flex items-center gap-2">
-          {strengthBars?.bars.map((color, index) => (
-            <div key={`${color}-${index}`} className={cn("w-full h-1 rounded-full", color)} />
-          ))}
-        </div>
-        <div className={cn(`text-xs font-medium text-custom-text-100`, strengthBars?.textColor)}>
-          {strengthBars?.text}
-        </div>
-      </div>
-
-      {/* <div className="relative flex flex-wrap gap-x-4 gap-y-2">
-        {PASSWORD_CRITERIA.map((criteria) => (
-          <div
-            key={criteria.key}
-            className={cn(
-              "relative flex items-center gap-1 text-xs",
-              criteria.isCriteriaValid(password) ? `text-green-500/70` : "text-custom-text-300"
-            )}
-          >
-            <CircleCheck width={14} height={14} />
-            {criteria.label}
-          </div>
-        ))}
-      </div> */}
-    </div>
-  );
-};

admin/core/components/instance/index.ts

@@ -1,3 +0,0 @@
-export * from "./instance-not-ready";
-export * from "./instance-failure-view";
-export * from "./setup-form";

admin/core/components/login/index.ts

@@ -1 +0,0 @@
-export * from "./sign-in-form";

admin/core/components/login/sign-in-form.tsx

@@ -1,194 +0,0 @@
-"use client";
-
-import { FC, useEffect, useMemo, useState } from "react";
-import { useSearchParams } from "next/navigation";
-import { Eye, EyeOff } from "lucide-react";
-// plane internal packages
-import { API_BASE_URL, EAdminAuthErrorCodes, TAdminAuthErrorInfo } from "@plane/constants";
-import { AuthService } from "@plane/services";
-import { Button, Input, Spinner } from "@plane/ui";
-// components
-import { Banner } from "@/components/common";
-// helpers
-import { authErrorHandler } from "@/lib/auth-helpers";
-// local components
-import { AuthBanner } from "../authentication";
-
-// service initialization
-const authService = new AuthService();
-
-// error codes
-enum EErrorCodes {
-  INSTANCE_NOT_CONFIGURED = "INSTANCE_NOT_CONFIGURED",
-  REQUIRED_EMAIL_PASSWORD = "REQUIRED_EMAIL_PASSWORD",
-  INVALID_EMAIL = "INVALID_EMAIL",
-  USER_DOES_NOT_EXIST = "USER_DOES_NOT_EXIST",
-  AUTHENTICATION_FAILED = "AUTHENTICATION_FAILED",
-}
-
-type TError = {
-  type: EErrorCodes | undefined;
-  message: string | undefined;
-};
-
-// form data
-type TFormData = {
-  email: string;
-  password: string;
-};
-
-const defaultFromData: TFormData = {
-  email: "",
-  password: "",
-};
-
-export const InstanceSignInForm: FC = (props) => {
-  const {} = props;
-  // search params
-  const searchParams = useSearchParams();
-  const emailParam = searchParams.get("email") || undefined;
-  const errorCode = searchParams.get("error_code") || undefined;
-  const errorMessage = searchParams.get("error_message") || undefined;
-  // state
-  const [showPassword, setShowPassword] = useState(false);
-  const [csrfToken, setCsrfToken] = useState<string | undefined>(undefined);
-  const [formData, setFormData] = useState<TFormData>(defaultFromData);
-  const [isSubmitting, setIsSubmitting] = useState(false);
-  const [errorInfo, setErrorInfo] = useState<TAdminAuthErrorInfo | undefined>(undefined);
-
-  const handleFormChange = (key: keyof TFormData, value: string | boolean) =>
-    setFormData((prev) => ({ ...prev, [key]: value }));
-
-  useEffect(() => {
-    if (csrfToken === undefined)
-      authService.requestCSRFToken().then((data) => data?.csrf_token && setCsrfToken(data.csrf_token));
-  }, [csrfToken]);
-
-  useEffect(() => {
-    if (emailParam) setFormData((prev) => ({ ...prev, email: emailParam }));
-  }, [emailParam]);
-
-  // derived values
-  const errorData: TError = useMemo(() => {
-    if (errorCode && errorMessage) {
-      switch (errorCode) {
-        case EErrorCodes.INSTANCE_NOT_CONFIGURED:
-          return { type: EErrorCodes.INVALID_EMAIL, message: errorMessage };
-        case EErrorCodes.REQUIRED_EMAIL_PASSWORD:
-          return { type: EErrorCodes.REQUIRED_EMAIL_PASSWORD, message: errorMessage };
-        case EErrorCodes.INVALID_EMAIL:
-          return { type: EErrorCodes.INVALID_EMAIL, message: errorMessage };
-        case EErrorCodes.USER_DOES_NOT_EXIST:
-          return { type: EErrorCodes.USER_DOES_NOT_EXIST, message: errorMessage };
-        case EErrorCodes.AUTHENTICATION_FAILED:
-          return { type: EErrorCodes.AUTHENTICATION_FAILED, message: errorMessage };
-        default:
-          return { type: undefined, message: undefined };
-      }
-    } else return { type: undefined, message: undefined };
-  }, [errorCode, errorMessage]);
-
-  const isButtonDisabled = useMemo(
-    () => (!isSubmitting && formData.email && formData.password ? false : true),
-    [formData.email, formData.password, isSubmitting]
-  );
-
-  useEffect(() => {
-    if (errorCode) {
-      const errorDetail = authErrorHandler(errorCode?.toString() as EAdminAuthErrorCodes);
-      if (errorDetail) {
-        setErrorInfo(errorDetail);
-      }
-    }
-  }, [errorCode]);
-
-  return (
-    <div className="flex-grow container mx-auto max-w-lg px-10 lg:max-w-md lg:px-5 py-10 lg:pt-28 transition-all">
-      <div className="relative flex flex-col space-y-6">
-        <div className="text-center space-y-1">
-          <h3 className="flex gap-4 justify-center text-3xl font-bold text-onboarding-text-100">
-            Manage your Plane instance
-          </h3>
-          <p className="font-medium text-onboarding-text-400">
-            Configure instance-wide settings to secure your instance
-          </p>
-        </div>
-
-        {errorData.type && errorData?.message ? (
-          <Banner type="error" message={errorData?.message} />
-        ) : (
-          <>{errorInfo && <AuthBanner bannerData={errorInfo} handleBannerData={(value) => setErrorInfo(value)} />}</>
-        )}
-
-        <form
-          className="space-y-4"
-          method="POST"
-          action={`${API_BASE_URL}/api/instances/admins/sign-in/`}
-          onSubmit={() => setIsSubmitting(true)}
-          onError={() => setIsSubmitting(false)}
-        >
-          <input type="hidden" name="csrfmiddlewaretoken" value={csrfToken} />
-
-          <div className="w-full space-y-1">
-            <label className="text-sm text-onboarding-text-300 font-medium" htmlFor="email">
-              Email <span className="text-red-500">*</span>
-            </label>
-            <Input
-              className="w-full border border-onboarding-border-100 !bg-onboarding-background-200 placeholder:text-onboarding-text-400"
-              id="email"
-              name="email"
-              type="email"
-              inputSize="md"
-              placeholder="name@company.com"
-              value={formData.email}
-              onChange={(e) => handleFormChange("email", e.target.value)}
-              autoComplete="on"
-              autoFocus
-            />
-          </div>
-
-          <div className="w-full space-y-1">
-            <label className="text-sm text-onboarding-text-300 font-medium" htmlFor="password">
-              Password <span className="text-red-500">*</span>
-            </label>
-            <div className="relative">
-              <Input
-                className="w-full border border-onboarding-border-100 !bg-onboarding-background-200 placeholder:text-onboarding-text-400"
-                id="password"
-                name="password"
-                type={showPassword ? "text" : "password"}
-                inputSize="md"
-                placeholder="Enter your password"
-                value={formData.password}
-                onChange={(e) => handleFormChange("password", e.target.value)}
-                autoComplete="on"
-              />
-              {showPassword ? (
-                <button
-                  type="button"
-                  className="absolute right-3 top-3.5 flex items-center justify-center text-custom-text-400"
-                  onClick={() => setShowPassword(false)}
-                >
-                  <EyeOff className="h-4 w-4" />
-                </button>
-              ) : (
-                <button
-                  type="button"
-                  className="absolute right-3 top-3.5 flex items-center justify-center text-custom-text-400"
-                  onClick={() => setShowPassword(true)}
-                >
-                  <Eye className="h-4 w-4" />
-                </button>
-              )}
-            </div>
-          </div>
-          <div className="py-2">
-            <Button type="submit" size="lg" className="w-full" disabled={isButtonDisabled}>
-              {isSubmitting ? <Spinner height="20px" width="20px" /> : "Sign in"}
-            </Button>
-          </div>
-        </form>
-      </div>
-    </div>
-  );
-};

admin/core/components/workspace/index.ts

@@ -1 +0,0 @@
-export * from "./list-item";

admin/core/lib/instance-provider.tsx

@@ -1,55 +0,0 @@
-import { FC, ReactNode } from "react";
-import { observer } from "mobx-react";
-import useSWR from "swr";
-// components
-import { LogoSpinner } from "@/components/common";
-import { InstanceSetupForm, InstanceFailureView } from "@/components/instance";
-// hooks
-import { useInstance } from "@/hooks/store";
-// layout
-import { DefaultLayout } from "@/layouts/default-layout";
-
-type InstanceProviderProps = {
-  children: ReactNode;
-};
-
-export const InstanceProvider: FC<InstanceProviderProps> = observer((props) => {
-  const { children } = props;
-  // store hooks
-  const { instance, error, fetchInstanceInfo } = useInstance();
-  // fetching instance details
-  useSWR("INSTANCE_DETAILS", () => fetchInstanceInfo(), {
-    revalidateOnFocus: false,
-    revalidateIfStale: false,
-    errorRetryCount: 0,
-  });
-
-  if (!instance && !error)
-    return (
-      <div className="flex h-screen min-h-[500px] w-full justify-center items-center">
-        <LogoSpinner />
-      </div>
-    );
-
-  if (error) {
-    return (
-      <DefaultLayout>
-        <div className="relative h-full w-full overflow-y-auto px-6 py-10 mx-auto flex justify-center items-center">
-          <InstanceFailureView />
-        </div>
-      </DefaultLayout>
-    );
-  }
-
-  if (!instance?.is_setup_done) {
-    return (
-      <DefaultLayout>
-        <div className="relative h-full w-full overflow-y-auto px-6 py-10 mx-auto flex justify-center items-center">
-          <InstanceSetupForm />
-        </div>
-      </DefaultLayout>
-    );
-  }
-
-  return <>{children}</>;
-});

admin/next.config.js

@@ -1,27 +0,0 @@
-/** @type {import('next').NextConfig} */
-
-const nextConfig = {
-  trailingSlash: true,
-  reactStrictMode: false,
-  swcMinify: true,
-  output: "standalone",
-  images: {
-    unoptimized: true,
-  },
-  basePath: process.env.NEXT_PUBLIC_ADMIN_BASE_PATH || "",
-  transpilePackages: [
-    "@plane/constants",
-    "@plane/editor",
-    "@plane/hooks",
-    "@plane/i18n",
-    "@plane/logger",
-    "@plane/propel",
-    "@plane/services",
-    "@plane/shared-state",
-    "@plane/types",
-    "@plane/ui",
-    "@plane/utils",
-  ],
-};
-
-module.exports = nextConfig;

aio/Dockerfile-app

@@ -1,182 +0,0 @@
-ARG BASE_TAG=develop
-ARG BUILD_TYPE=full
-# *****************************************************************************
-# STAGE 1: Build the project
-# *****************************************************************************
-FROM node:18-alpine AS builder
-RUN apk add --no-cache libc6-compat
-# Set working directory
-WORKDIR /app
-
-RUN yarn global add turbo
-COPY . .
-
-RUN turbo prune --scope=web --scope=space --scope=admin --docker
-
-# *****************************************************************************
-# STAGE 2: Install dependencies & build the project
-# *****************************************************************************
-# Add lockfile and package.json's of isolated subworkspace
-FROM node:18-alpine AS installer
-
-RUN apk add --no-cache libc6-compat
-WORKDIR /app
-
-# First install the dependencies (as they change less often)
-COPY .gitignore .gitignore
-COPY --from=builder /app/out/json/ .
-COPY --from=builder /app/out/yarn.lock ./yarn.lock
-RUN yarn install
-
-# # Build the project
-COPY --from=builder /app/out/full/ .
-COPY turbo.json turbo.json
-
-ARG NEXT_PUBLIC_API_BASE_URL=""
-ENV NEXT_PUBLIC_API_BASE_URL=$NEXT_PUBLIC_API_BASE_URL
-
-ARG NEXT_PUBLIC_ADMIN_BASE_URL=""
-ENV NEXT_PUBLIC_ADMIN_BASE_URL=$NEXT_PUBLIC_ADMIN_BASE_URL
-
-ARG NEXT_PUBLIC_ADMIN_BASE_PATH="/god-mode"
-ENV NEXT_PUBLIC_ADMIN_BASE_PATH=$NEXT_PUBLIC_ADMIN_BASE_PATH
-
-ARG NEXT_PUBLIC_SPACE_BASE_URL=""
-ENV NEXT_PUBLIC_SPACE_BASE_URL=$NEXT_PUBLIC_SPACE_BASE_URL
-
-ARG NEXT_PUBLIC_SPACE_BASE_PATH="/spaces"
-ENV NEXT_PUBLIC_SPACE_BASE_PATH=$NEXT_PUBLIC_SPACE_BASE_PATH
-
-ARG NEXT_PUBLIC_WEB_BASE_URL=""
-ENV NEXT_PUBLIC_WEB_BASE_URL=$NEXT_PUBLIC_WEB_BASE_URL
-
-ENV NEXT_TELEMETRY_DISABLED=1
-ENV TURBO_TELEMETRY_DISABLED=1
-
-RUN yarn turbo run build --filter=web --filter=space --filter=admin
-
-# *****************************************************************************
-# STAGE 3: Copy the project and start it
-# *****************************************************************************
-FROM makeplane/plane-aio-base:${BUILD_TYPE}-${BASE_TAG} AS runner
-
-WORKDIR /app
-
-SHELL [ "/bin/bash", "-c" ]
-
-# PYTHON APPLICATION SETUP
-
-ENV PYTHONDONTWRITEBYTECODE=1
-ENV PYTHONUNBUFFERED=1
-ENV PIP_DISABLE_PIP_VERSION_CHECK=1 
-
-COPY apiserver/requirements.txt ./api/
-COPY apiserver/requirements ./api/requirements
-
-RUN pip install -r ./api/requirements.txt --compile --no-cache-dir
-
-# Add in Django deps and generate Django's static files
-COPY apiserver/manage.py ./api/manage.py
-COPY apiserver/plane ./api/plane/
-COPY apiserver/templates ./api/templates/
-COPY package.json ./api/package.json
-
-COPY apiserver/bin ./api/bin/
-
-RUN chmod +x ./api/bin/*
-RUN chmod -R 777 ./api/
-
-# NEXTJS BUILDS
-COPY --from=installer /app/web/next.config.js ./web/
-COPY --from=installer /app/web/package.json ./web/
-COPY --from=installer /app/web/.next/standalone ./web
-COPY --from=installer /app/web/.next/static ./web/web/.next/static
-COPY --from=installer /app/web/public ./web/web/public
-
-COPY --from=installer /app/space/next.config.js ./space/
-COPY --from=installer /app/space/package.json ./space/
-COPY --from=installer /app/space/.next/standalone ./space
-COPY --from=installer /app/space/.next/static ./space/space/.next/static
-COPY --from=installer /app/space/public ./space/space/public
-
-COPY --from=installer /app/admin/next.config.js ./admin/
-COPY --from=installer /app/admin/package.json ./admin/
-COPY --from=installer /app/admin/.next/standalone ./admin
-COPY --from=installer /app/admin/.next/static ./admin/admin/.next/static
-COPY --from=installer /app/admin/public ./admin/admin/public
-
-ARG NEXT_PUBLIC_API_BASE_URL=""
-ENV NEXT_PUBLIC_API_BASE_URL=$NEXT_PUBLIC_API_BASE_URL
-
-ARG NEXT_PUBLIC_ADMIN_BASE_URL=""
-ENV NEXT_PUBLIC_ADMIN_BASE_URL=$NEXT_PUBLIC_ADMIN_BASE_URL
-
-ARG NEXT_PUBLIC_ADMIN_BASE_PATH="/god-mode"
-ENV NEXT_PUBLIC_ADMIN_BASE_PATH=$NEXT_PUBLIC_ADMIN_BASE_PATH
-
-ARG NEXT_PUBLIC_SPACE_BASE_URL=""
-ENV NEXT_PUBLIC_SPACE_BASE_URL=$NEXT_PUBLIC_SPACE_BASE_URL
-
-ARG NEXT_PUBLIC_SPACE_BASE_PATH="/spaces"
-ENV NEXT_PUBLIC_SPACE_BASE_PATH=$NEXT_PUBLIC_SPACE_BASE_PATH
-
-ARG NEXT_PUBLIC_WEB_BASE_URL=""
-ENV NEXT_PUBLIC_WEB_BASE_URL=$NEXT_PUBLIC_WEB_BASE_URL
-
-ENV NEXT_TELEMETRY_DISABLED=1
-ENV TURBO_TELEMETRY_DISABLED=1
-
-ARG BUILD_TYPE=full
-ENV BUILD_TYPE=$BUILD_TYPE
-
-COPY aio/supervisord-${BUILD_TYPE}-base /app/supervisord.conf
-COPY aio/supervisord-app /app/supervisord-app
-RUN cat /app/supervisord-app >> /app/supervisord.conf && \
-    rm /app/supervisord-app
-
-COPY ./aio/nginx.conf /etc/nginx/nginx.conf.template
-
-# if build type is full, run the below copy pg-setup.sh
-COPY aio/postgresql.conf /etc/postgresql/postgresql.conf
-COPY aio/pg-setup.sh /app/pg-setup.sh
-RUN chmod +x /app/pg-setup.sh 
-
-# *****************************************************************************
-#  APPLICATION ENVIRONMENT SETTINGS
-# *****************************************************************************
-ENV APP_DOMAIN=localhost
-ENV WEB_URL=http://${APP_DOMAIN}
-ENV DEBUG=0
-ENV CORS_ALLOWED_ORIGINS=http://${APP_DOMAIN},https://${APP_DOMAIN}
-# Secret Key
-ENV SECRET_KEY=60gp0byfz2dvffa45cxl20p1scy9xbpf6d8c5y0geejgkyp1b5
-# Gunicorn Workers
-ENV GUNICORN_WORKERS=1
-
-ENV POSTGRES_USER="plane"
-ENV POSTGRES_PASSWORD="plane"
-ENV POSTGRES_DB="plane"
-ENV POSTGRES_HOST="localhost"
-ENV POSTGRES_PORT="5432"
-ENV DATABASE_URL="postgresql://plane:plane@localhost:5432/plane"
-
-ENV REDIS_HOST="localhost"
-ENV REDIS_PORT="6379"
-ENV REDIS_URL="redis://localhost:6379"
-
-ENV USE_MINIO="1"
-ENV AWS_REGION=""
-ENV AWS_ACCESS_KEY_ID="access-key"
-ENV AWS_SECRET_ACCESS_KEY="secret-key"
-ENV AWS_S3_ENDPOINT_URL="http://localhost:9000"
-ENV AWS_S3_BUCKET_NAME="uploads"
-ENV MINIO_ROOT_USER="access-key"
-ENV MINIO_ROOT_PASSWORD="secret-key"
-ENV BUCKET_NAME="uploads"
-ENV FILE_SIZE_LIMIT="5242880"
-
-# *****************************************************************************
-
-RUN /app/pg-setup.sh
-
-CMD ["/usr/bin/supervisord", "-c", "/app/supervisord.conf"]

aio/Dockerfile-base-full

@@ -1,73 +0,0 @@
-FROM --platform=$BUILDPLATFORM tonistiigi/binfmt AS binfmt
-
-FROM python:3.12-slim
-
-# Set environment variables to non-interactive for apt
-ENV DEBIAN_FRONTEND=noninteractive
-ENV BUILD_TYPE=full
-
-SHELL [ "/bin/bash", "-c" ]
-
-WORKDIR /app
-
-RUN mkdir -p /app/{data,logs} && \
-    mkdir -p /app/data/{redis,pg,minio,nginx} && \
-    mkdir -p /app/logs/{access,error} && \
-    mkdir -p /etc/supervisor/conf.d
-
-# Update the package list and install prerequisites
-RUN apt-get update && \
-    apt-get install -y \
-    gnupg2 curl ca-certificates lsb-release software-properties-common \
-    build-essential libssl-dev zlib1g-dev libbz2-dev libreadline-dev \
-    libsqlite3-dev wget llvm libncurses5-dev libncursesw5-dev xz-utils \
-    tk-dev libffi-dev liblzma-dev supervisor nginx nano vim ncdu \
-    sudo lsof net-tools libpq-dev procps gettext
-
-# Install Redis 7.2
-RUN echo "deb http://deb.debian.org/debian $(lsb_release -cs)-backports main" > /etc/apt/sources.list.d/backports.list && \
-    curl -fsSL https://packages.redis.io/gpg | gpg --dearmor -o /usr/share/keyrings/redis-archive-keyring.gpg && \
-    echo "deb [signed-by=/usr/share/keyrings/redis-archive-keyring.gpg] https://packages.redis.io/deb $(lsb_release -cs) main" > /etc/apt/sources.list.d/redis.list && \
-    apt-get update && \
-    apt-get install -y redis-server
-
-# Install PostgreSQL 15
-ENV POSTGRES_VERSION=15
-RUN curl -fsSL https://www.postgresql.org/media/keys/ACCC4CF8.asc | gpg --dearmor -o /usr/share/keyrings/pgdg-archive-keyring.gpg && \
-    echo "deb [signed-by=/usr/share/keyrings/pgdg-archive-keyring.gpg] http://apt.postgresql.org/pub/repos/apt $(lsb_release -cs)-pgdg main" > /etc/apt/sources.list.d/pgdg.list && \
-    apt-get update && \
-    apt-get install -y postgresql-$POSTGRES_VERSION postgresql-client-$POSTGRES_VERSION && \
-    mkdir -p /var/lib/postgresql/data && \
-    chown -R postgres:postgres /var/lib/postgresql
-COPY postgresql.conf /etc/postgresql/postgresql.conf
-RUN sudo -u postgres /usr/lib/postgresql/$POSTGRES_VERSION/bin/initdb -D /var/lib/postgresql/data
-
-# Install MinIO
-ARG TARGETARCH
-RUN if [ "$TARGETARCH" = "amd64" ]; then \
-        curl -fSl https://dl.min.io/server/minio/release/linux-amd64/minio -o /usr/local/bin/minio; \
-    elif [ "$TARGETARCH" = "arm64" ]; then \
-        curl -fSl https://dl.min.io/server/minio/release/linux-arm64/minio -o /usr/local/bin/minio; \
-    else \
-        echo "Unsupported architecture: $TARGETARCH"; exit 1; \
-    fi && \
-    chmod +x /usr/local/bin/minio
-
-# Install Node.js 18
-RUN curl -fsSL https://deb.nodesource.com/setup_18.x | bash - && \
-    apt-get install -y nodejs && \
-    python -m pip install --upgrade pip && \
-    apt-get clean && \
-    rm -rf /var/lib/apt/lists/*
-
-# Create Supervisor configuration file
-COPY supervisord-full-base /app/supervisord.conf
-COPY nginx.conf /etc/nginx/nginx.conf.template
-COPY env.sh /app/nginx-start.sh
-RUN chmod +x /app/nginx-start.sh
-
-# Expose ports for Redis, PostgreSQL, and MinIO
-EXPOSE 6379 5432 9000 80 443
-
-# Start Supervisor
-CMD ["/usr/bin/supervisord", "-c", "/app/supervisord.conf"]

aio/Dockerfile-base-slim

@@ -1,45 +0,0 @@
-FROM --platform=$BUILDPLATFORM tonistiigi/binfmt AS binfmt
-
-FROM python:3.12-slim
-
-# Set environment variables to non-interactive for apt
-ENV DEBIAN_FRONTEND=noninteractive
-ENV BUILD_TYPE=slim
-
-SHELL [ "/bin/bash", "-c" ]
-
-WORKDIR /app
-
-RUN mkdir -p /app/{data,logs} && \
-    mkdir -p /app/data/{nginx} && \
-    mkdir -p /app/logs/{access,error} && \
-    mkdir -p /etc/supervisor/conf.d
-
-# Update the package list and install prerequisites
-RUN apt-get update && \
-    apt-get install -y \
-    gnupg2 curl ca-certificates lsb-release software-properties-common \
-    build-essential libssl-dev zlib1g-dev libbz2-dev libreadline-dev \
-    libsqlite3-dev wget llvm libncurses5-dev libncursesw5-dev xz-utils \
-    tk-dev libffi-dev liblzma-dev supervisor nginx nano vim ncdu \
-    sudo lsof net-tools libpq-dev procps gettext
-
-# Install Node.js 18
-RUN curl -fsSL https://deb.nodesource.com/setup_18.x | bash - && \
-    apt-get install -y nodejs
-
-RUN python -m pip install --upgrade pip && \
-    apt-get clean && \
-    rm -rf /var/lib/apt/lists/*
-    
-# Create Supervisor configuration file
-COPY supervisord-slim-base /app/supervisord.conf
-COPY nginx.conf /etc/nginx/nginx.conf.template
-COPY env.sh /app/nginx-start.sh
-RUN chmod +x /app/nginx-start.sh
-
-# Expose ports for Redis, PostgreSQL, and MinIO
-EXPOSE 80 443
-
-# Start Supervisor
-CMD ["/usr/bin/supervisord", "-c", "/app/supervisord.conf"]

aio/env.sh

@@ -1,7 +0,0 @@
-#!/bin/bash
-
-export dollar="$"
-export http_upgrade="http_upgrade"
-export scheme="scheme"
-envsubst < /etc/nginx/nginx.conf.template > /etc/nginx/nginx.conf
-exec nginx -g 'daemon off;'

aio/nginx.conf

@@ -1,72 +0,0 @@
-events {
-}
-
-http {
-    sendfile on;
-
-    server {
-        listen 80;
-        root /www/data/;
-        access_log /var/log/nginx/access.log;
-
-        client_max_body_size ${FILE_SIZE_LIMIT};
-
-        add_header X-Content-Type-Options    "nosniff" always;
-        add_header Referrer-Policy           "no-referrer-when-downgrade" always;
-        add_header Permissions-Policy        "interest-cohort=()" always;
-        add_header Strict-Transport-Security "max-age=31536000; includeSubDomains" always;
-        add_header X-Forwarded-Proto         "${dollar}scheme";
-        add_header X-Forwarded-Host          "${dollar}host";
-        add_header X-Forwarded-For           "${dollar}proxy_add_x_forwarded_for";
-        add_header X-Real-IP                 "${dollar}remote_addr";
-
-        location / {
-            proxy_http_version 1.1;
-            proxy_set_header Upgrade ${dollar}http_upgrade;
-            proxy_set_header Connection "upgrade";
-            proxy_set_header Host ${dollar}http_host;
-            proxy_pass http://localhost:3001/;
-        }
-
-        location /spaces/ {
-            rewrite ^/spaces/?$ /spaces/login break;            
-            proxy_http_version 1.1;
-            proxy_set_header Upgrade ${dollar}http_upgrade;
-            proxy_set_header Connection "upgrade";
-            proxy_set_header Host ${dollar}http_host;
-            proxy_pass http://localhost:3002/spaces/;
-        }
-
-        location /god-mode/ {
-            proxy_http_version 1.1;
-            proxy_set_header Upgrade ${dollar}http_upgrade;
-            proxy_set_header Connection "upgrade";
-            proxy_set_header Host ${dollar}http_host;
-            proxy_pass http://localhost:3003/god-mode/;
-        }
-
-        location /api/ {
-            proxy_http_version 1.1;
-            proxy_set_header Upgrade ${dollar}http_upgrade;
-            proxy_set_header Connection "upgrade";
-            proxy_set_header Host ${dollar}http_host;
-            proxy_pass http://localhost:8000/api/;
-        }
-
-        location /auth/ {
-            proxy_http_version 1.1;
-            proxy_set_header Upgrade ${dollar}http_upgrade;
-            proxy_set_header Connection "upgrade";
-            proxy_set_header Host ${dollar}http_host;
-            proxy_pass http://localhost:8000/auth/;
-        }
-
-        location /${BUCKET_NAME}/ {
-            proxy_http_version 1.1;
-            proxy_set_header Upgrade ${dollar}http_upgrade;
-            proxy_set_header Connection "upgrade";
-            proxy_set_header Host ${dollar}http_host;
-            proxy_pass http://localhost:9000/uploads/;
-        }
-    }
-}

aio/pg-setup.sh

@@ -1,14 +0,0 @@
-#!/bin/bash
-
-if [ "$BUILD_TYPE" == "full" ]; then 
-
-    export PGHOST=localhost
-
-    sudo -u postgres "/usr/lib/postgresql/${POSTGRES_VERSION}/bin/pg_ctl" -D /var/lib/postgresql/data start
-    sudo -u postgres "/usr/lib/postgresql/${POSTGRES_VERSION}/bin/psql" --command "CREATE USER $POSTGRES_USER WITH SUPERUSER PASSWORD '$POSTGRES_PASSWORD';" && \
-    sudo -u postgres "/usr/lib/postgresql/${POSTGRES_VERSION}/bin/createdb" -O "$POSTGRES_USER" "$POSTGRES_DB" && \
-    sudo -u postgres "/usr/lib/postgresql/${POSTGRES_VERSION}/bin/psql" --command "GRANT ALL PRIVILEGES ON DATABASE $POSTGRES_DB TO $POSTGRES_USER;" && \
-    sudo -u postgres "/usr/lib/postgresql/${POSTGRES_VERSION}/bin/pg_ctl" -D /var/lib/postgresql/data stop
-
-fi
-

aio/postgresql.conf

@@ -1,815 +0,0 @@
-# -----------------------------
-# PostgreSQL configuration file
-# -----------------------------
-#
-# This file consists of lines of the form:
-#
-#   name = value
-#
-# (The "=" is optional.)  Whitespace may be used.  Comments are introduced with
-# "#" anywhere on a line.  The complete list of parameter names and allowed
-# values can be found in the PostgreSQL documentation.
-#
-# The commented-out settings shown in this file represent the default values.
-# Re-commenting a setting is NOT sufficient to revert it to the default value;
-# you need to reload the server.
-#
-# This file is read on server startup and when the server receives a SIGHUP
-# signal.  If you edit the file on a running system, you have to SIGHUP the
-# server for the changes to take effect, run "pg_ctl reload", or execute
-# "SELECT pg_reload_conf()".  Some parameters, which are marked below,
-# require a server shutdown and restart to take effect.
-#
-# Any parameter can also be given as a command-line option to the server, e.g.,
-# "postgres -c log_connections=on".  Some parameters can be changed at run time
-# with the "SET" SQL command.
-#
-# Memory units:  B  = bytes            Time units:  us  = microseconds
-#                kB = kilobytes                     ms  = milliseconds
-#                MB = megabytes                     s   = seconds
-#                GB = gigabytes                     min = minutes
-#                TB = terabytes                     h   = hours
-#                                                   d   = days
-
-
-#------------------------------------------------------------------------------
-# FILE LOCATIONS
-#------------------------------------------------------------------------------
-
-# The default values of these variables are driven from the -D command-line
-# option or PGDATA environment variable, represented here as ConfigDir.
-
-data_directory = '/var/lib/postgresql/data'		# use data in another directory
-					# (change requires restart)
-hba_file = '/etc/postgresql/15/main/pg_hba.conf'	# host-based authentication file
-					# (change requires restart)
-ident_file = '/etc/postgresql/15/main/pg_ident.conf'	# ident configuration file
-					# (change requires restart)
-
-# If external_pid_file is not explicitly set, no extra PID file is written.
-external_pid_file = '/var/run/postgresql/15-main.pid'			# write an extra PID file
-					# (change requires restart)
-
-
-#------------------------------------------------------------------------------
-# CONNECTIONS AND AUTHENTICATION
-#------------------------------------------------------------------------------
-
-# - Connection Settings -
-
-listen_addresses = 'localhost'		# what IP address(es) to listen on;
-					# comma-separated list of addresses;
-					# defaults to 'localhost'; use '*' for all
-					# (change requires restart)
-port = 5432				# (change requires restart)
-max_connections = 200			# (change requires restart)
-#superuser_reserved_connections = 3	# (change requires restart)
-unix_socket_directories = '/var/run/postgresql'	# comma-separated list of directories
-					# (change requires restart)
-#unix_socket_group = ''			# (change requires restart)
-#unix_socket_permissions = 0777		# begin with 0 to use octal notation
-					# (change requires restart)
-#bonjour = off				# advertise server via Bonjour
-					# (change requires restart)
-#bonjour_name = ''			# defaults to the computer name
-					# (change requires restart)
-
-# - TCP settings -
-# see "man tcp" for details
-
-#tcp_keepalives_idle = 0		# TCP_KEEPIDLE, in seconds;
-					# 0 selects the system default
-#tcp_keepalives_interval = 0		# TCP_KEEPINTVL, in seconds;
-					# 0 selects the system default
-#tcp_keepalives_count = 0		# TCP_KEEPCNT;
-					# 0 selects the system default
-#tcp_user_timeout = 0			# TCP_USER_TIMEOUT, in milliseconds;
-					# 0 selects the system default
-
-#client_connection_check_interval = 0	# time between checks for client
-					# disconnection while running queries;
-					# 0 for never
-
-# - Authentication -
-
-#authentication_timeout = 1min		# 1s-600s
-#password_encryption = scram-sha-256	# scram-sha-256 or md5
-#db_user_namespace = off
-
-# GSSAPI using Kerberos
-#krb_server_keyfile = 'FILE:${sysconfdir}/krb5.keytab'
-#krb_caseins_users = off
-
-# - SSL -
-
-ssl = on
-#ssl_ca_file = ''
-ssl_cert_file = '/etc/ssl/certs/ssl-cert-snakeoil.pem'
-#ssl_crl_file = ''
-#ssl_crl_dir = ''
-ssl_key_file = '/etc/ssl/private/ssl-cert-snakeoil.key'
-#ssl_ciphers = 'HIGH:MEDIUM:+3DES:!aNULL' # allowed SSL ciphers
-#ssl_prefer_server_ciphers = on
-#ssl_ecdh_curve = 'prime256v1'
-#ssl_min_protocol_version = 'TLSv1.2'
-#ssl_max_protocol_version = ''
-#ssl_dh_params_file = ''
-#ssl_passphrase_command = ''
-#ssl_passphrase_command_supports_reload = off
-
-
-#------------------------------------------------------------------------------
-# RESOURCE USAGE (except WAL)
-#------------------------------------------------------------------------------
-
-# - Memory -
-
-shared_buffers = 256MB			# min 128kB
-					# (change requires restart)
-#huge_pages = try			# on, off, or try
-					# (change requires restart)
-#huge_page_size = 0			# zero for system default
-					# (change requires restart)
-#temp_buffers = 8MB			# min 800kB
-#max_prepared_transactions = 0		# zero disables the feature
-					# (change requires restart)
-# Caution: it is not advisable to set max_prepared_transactions nonzero unless
-# you actively intend to use prepared transactions.
-#work_mem = 4MB				# min 64kB
-#hash_mem_multiplier = 2.0		# 1-1000.0 multiplier on hash table work_mem
-#maintenance_work_mem = 64MB		# min 1MB
-#autovacuum_work_mem = -1		# min 1MB, or -1 to use maintenance_work_mem
-#logical_decoding_work_mem = 64MB	# min 64kB
-#max_stack_depth = 2MB			# min 100kB
-#shared_memory_type = mmap		# the default is the first option
-					# supported by the operating system:
-					#   mmap
-					#   sysv
-					#   windows
-					# (change requires restart)
-dynamic_shared_memory_type = posix	# the default is usually the first option
-					# supported by the operating system:
-					#   posix
-					#   sysv
-					#   windows
-					#   mmap
-					# (change requires restart)
-#min_dynamic_shared_memory = 0MB	# (change requires restart)
-
-# - Disk -
-
-#temp_file_limit = -1			# limits per-process temp file space
-					# in kilobytes, or -1 for no limit
-
-# - Kernel Resources -
-
-#max_files_per_process = 1000		# min 64
-					# (change requires restart)
-
-# - Cost-Based Vacuum Delay -
-
-#vacuum_cost_delay = 0			# 0-100 milliseconds (0 disables)
-#vacuum_cost_page_hit = 1		# 0-10000 credits
-#vacuum_cost_page_miss = 2		# 0-10000 credits
-#vacuum_cost_page_dirty = 20		# 0-10000 credits
-#vacuum_cost_limit = 200		# 1-10000 credits
-
-# - Background Writer -
-
-#bgwriter_delay = 200ms			# 10-10000ms between rounds
-#bgwriter_lru_maxpages = 100		# max buffers written/round, 0 disables
-#bgwriter_lru_multiplier = 2.0		# 0-10.0 multiplier on buffers scanned/round
-#bgwriter_flush_after = 512kB		# measured in pages, 0 disables
-
-# - Asynchronous Behavior -
-
-#backend_flush_after = 0		# measured in pages, 0 disables
-#effective_io_concurrency = 1		# 1-1000; 0 disables prefetching
-#maintenance_io_concurrency = 10	# 1-1000; 0 disables prefetching
-#max_worker_processes = 8		# (change requires restart)
-#max_parallel_workers_per_gather = 2	# limited by max_parallel_workers
-#max_parallel_maintenance_workers = 2	# limited by max_parallel_workers
-#max_parallel_workers = 8		# number of max_worker_processes that
-					# can be used in parallel operations
-#parallel_leader_participation = on
-#old_snapshot_threshold = -1		# 1min-60d; -1 disables; 0 is immediate
-					# (change requires restart)
-
-
-#------------------------------------------------------------------------------
-# WRITE-AHEAD LOG
-#------------------------------------------------------------------------------
-
-# - Settings -
-
-#wal_level = replica			# minimal, replica, or logical
-					# (change requires restart)
-#fsync = on				# flush data to disk for crash safety
-					# (turning this off can cause
-					# unrecoverable data corruption)
-#synchronous_commit = on		# synchronization level;
-					# off, local, remote_write, remote_apply, or on
-#wal_sync_method = fsync		# the default is the first option
-					# supported by the operating system:
-					#   open_datasync
-					#   fdatasync (default on Linux and FreeBSD)
-					#   fsync
-					#   fsync_writethrough
-					#   open_sync
-#full_page_writes = on			# recover from partial page writes
-#wal_log_hints = off			# also do full page writes of non-critical updates
-					# (change requires restart)
-#wal_compression = off			# enables compression of full-page writes;
-					# off, pglz, lz4, zstd, or on
-#wal_init_zero = on			# zero-fill new WAL files
-#wal_recycle = on			# recycle WAL files
-#wal_buffers = -1			# min 32kB, -1 sets based on shared_buffers
-					# (change requires restart)
-#wal_writer_delay = 200ms		# 1-10000 milliseconds
-#wal_writer_flush_after = 1MB		# measured in pages, 0 disables
-#wal_skip_threshold = 2MB
-
-#commit_delay = 0			# range 0-100000, in microseconds
-#commit_siblings = 5			# range 1-1000
-
-# - Checkpoints -
-
-#checkpoint_timeout = 5min		# range 30s-1d
-#checkpoint_completion_target = 0.9	# checkpoint target duration, 0.0 - 1.0
-#checkpoint_flush_after = 256kB		# measured in pages, 0 disables
-#checkpoint_warning = 30s		# 0 disables
-max_wal_size = 1GB
-min_wal_size = 80MB
-
-# - Prefetching during recovery -
-
-#recovery_prefetch = try		# prefetch pages referenced in the WAL?
-#wal_decode_buffer_size = 512kB		# lookahead window used for prefetching
-					# (change requires restart)
-
-# - Archiving -
-
-#archive_mode = off		# enables archiving; off, on, or always
-				# (change requires restart)
-#archive_library = ''		# library to use to archive a logfile segment
-				# (empty string indicates archive_command should
-				# be used)
-#archive_command = ''		# command to use to archive a logfile segment
-				# placeholders: %p = path of file to archive
-				#               %f = file name only
-				# e.g. 'test ! -f /mnt/server/archivedir/%f && cp %p /mnt/server/archivedir/%f'
-#archive_timeout = 0		# force a logfile segment switch after this
-				# number of seconds; 0 disables
-
-# - Archive Recovery -
-
-# These are only used in recovery mode.
-
-#restore_command = ''		# command to use to restore an archived logfile segment
-				# placeholders: %p = path of file to restore
-				#               %f = file name only
-				# e.g. 'cp /mnt/server/archivedir/%f %p'
-#archive_cleanup_command = ''	# command to execute at every restartpoint
-#recovery_end_command = ''	# command to execute at completion of recovery
-
-# - Recovery Target -
-
-# Set these only when performing a targeted recovery.
-
-#recovery_target = ''		# 'immediate' to end recovery as soon as a
-                                # consistent state is reached
-				# (change requires restart)
-#recovery_target_name = ''	# the named restore point to which recovery will proceed
-				# (change requires restart)
-#recovery_target_time = ''	# the time stamp up to which recovery will proceed
-				# (change requires restart)
-#recovery_target_xid = ''	# the transaction ID up to which recovery will proceed
-				# (change requires restart)
-#recovery_target_lsn = ''	# the WAL LSN up to which recovery will proceed
-				# (change requires restart)
-#recovery_target_inclusive = on # Specifies whether to stop:
-				# just after the specified recovery target (on)
-				# just before the recovery target (off)
-				# (change requires restart)
-#recovery_target_timeline = 'latest'	# 'current', 'latest', or timeline ID
-				# (change requires restart)
-#recovery_target_action = 'pause'	# 'pause', 'promote', 'shutdown'
-				# (change requires restart)
-
-
-#------------------------------------------------------------------------------
-# REPLICATION
-#------------------------------------------------------------------------------
-
-# - Sending Servers -
-
-# Set these on the primary and on any standby that will send replication data.
-
-#max_wal_senders = 10		# max number of walsender processes
-				# (change requires restart)
-#max_replication_slots = 10	# max number of replication slots
-				# (change requires restart)
-#wal_keep_size = 0		# in megabytes; 0 disables
-#max_slot_wal_keep_size = -1	# in megabytes; -1 disables
-#wal_sender_timeout = 60s	# in milliseconds; 0 disables
-#track_commit_timestamp = off	# collect timestamp of transaction commit
-				# (change requires restart)
-
-# - Primary Server -
-
-# These settings are ignored on a standby server.
-
-#synchronous_standby_names = ''	# standby servers that provide sync rep
-				# method to choose sync standbys, number of sync standbys,
-				# and comma-separated list of application_name
-				# from standby(s); '*' = all
-#vacuum_defer_cleanup_age = 0	# number of xacts by which cleanup is delayed
-
-# - Standby Servers -
-
-# These settings are ignored on a primary server.
-
-#primary_conninfo = ''			# connection string to sending server
-#primary_slot_name = ''			# replication slot on sending server
-#promote_trigger_file = ''		# file name whose presence ends recovery
-#hot_standby = on			# "off" disallows queries during recovery
-					# (change requires restart)
-#max_standby_archive_delay = 30s	# max delay before canceling queries
-					# when reading WAL from archive;
-					# -1 allows indefinite delay
-#max_standby_streaming_delay = 30s	# max delay before canceling queries
-					# when reading streaming WAL;
-					# -1 allows indefinite delay
-#wal_receiver_create_temp_slot = off	# create temp slot if primary_slot_name
-					# is not set
-#wal_receiver_status_interval = 10s	# send replies at least this often
-					# 0 disables
-#hot_standby_feedback = off		# send info from standby to prevent
-					# query conflicts
-#wal_receiver_timeout = 60s		# time that receiver waits for
-					# communication from primary
-					# in milliseconds; 0 disables
-#wal_retrieve_retry_interval = 5s	# time to wait before retrying to
-					# retrieve WAL after a failed attempt
-#recovery_min_apply_delay = 0		# minimum delay for applying changes during recovery
-
-# - Subscribers -
-
-# These settings are ignored on a publisher.
-
-#max_logical_replication_workers = 4	# taken from max_worker_processes
-					# (change requires restart)
-#max_sync_workers_per_subscription = 2	# taken from max_logical_replication_workers
-
-
-#------------------------------------------------------------------------------
-# QUERY TUNING
-#------------------------------------------------------------------------------
-
-# - Planner Method Configuration -
-
-#enable_async_append = on
-#enable_bitmapscan = on
-#enable_gathermerge = on
-#enable_hashagg = on
-#enable_hashjoin = on
-#enable_incremental_sort = on
-#enable_indexscan = on
-#enable_indexonlyscan = on
-#enable_material = on
-#enable_memoize = on
-#enable_mergejoin = on
-#enable_nestloop = on
-#enable_parallel_append = on
-#enable_parallel_hash = on
-#enable_partition_pruning = on
-#enable_partitionwise_join = off
-#enable_partitionwise_aggregate = off
-#enable_seqscan = on
-#enable_sort = on
-#enable_tidscan = on
-
-# - Planner Cost Constants -
-
-#seq_page_cost = 1.0			# measured on an arbitrary scale
-#random_page_cost = 4.0			# same scale as above
-#cpu_tuple_cost = 0.01			# same scale as above
-#cpu_index_tuple_cost = 0.005		# same scale as above
-#cpu_operator_cost = 0.0025		# same scale as above
-#parallel_setup_cost = 1000.0	# same scale as above
-#parallel_tuple_cost = 0.1		# same scale as above
-#min_parallel_table_scan_size = 8MB
-#min_parallel_index_scan_size = 512kB
-#effective_cache_size = 4GB
-
-#jit_above_cost = 100000		# perform JIT compilation if available
-					# and query more expensive than this;
-					# -1 disables
-#jit_inline_above_cost = 500000		# inline small functions if query is
-					# more expensive than this; -1 disables
-#jit_optimize_above_cost = 500000	# use expensive JIT optimizations if
-					# query is more expensive than this;
-					# -1 disables
-
-# - Genetic Query Optimizer -
-
-#geqo = on
-#geqo_threshold = 12
-#geqo_effort = 5			# range 1-10
-#geqo_pool_size = 0			# selects default based on effort
-#geqo_generations = 0			# selects default based on effort
-#geqo_selection_bias = 2.0		# range 1.5-2.0
-#geqo_seed = 0.0			# range 0.0-1.0
-
-# - Other Planner Options -
-
-#default_statistics_target = 100	# range 1-10000
-#constraint_exclusion = partition	# on, off, or partition
-#cursor_tuple_fraction = 0.1		# range 0.0-1.0
-#from_collapse_limit = 8
-#jit = on				# allow JIT compilation
-#join_collapse_limit = 8		# 1 disables collapsing of explicit
-					# JOIN clauses
-#plan_cache_mode = auto			# auto, force_generic_plan or
-					# force_custom_plan
-#recursive_worktable_factor = 10.0	# range 0.001-1000000
-
-
-#------------------------------------------------------------------------------
-# REPORTING AND LOGGING
-#------------------------------------------------------------------------------
-
-# - Where to Log -
-
-#log_destination = 'stderr'		# Valid values are combinations of
-					# stderr, csvlog, jsonlog, syslog, and
-					# eventlog, depending on platform.
-					# csvlog and jsonlog require
-					# logging_collector to be on.
-
-# This is used when logging to stderr:
-#logging_collector = off		# Enable capturing of stderr, jsonlog,
-					# and csvlog into log files. Required
-					# to be on for csvlogs and jsonlogs.
-					# (change requires restart)
-
-# These are only used if logging_collector is on:
-#log_directory = 'log'			# directory where log files are written,
-					# can be absolute or relative to PGDATA
-#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log'	# log file name pattern,
-					# can include strftime() escapes
-#log_file_mode = 0600			# creation mode for log files,
-					# begin with 0 to use octal notation
-#log_rotation_age = 1d			# Automatic rotation of logfiles will
-					# happen after that time.  0 disables.
-#log_rotation_size = 10MB		# Automatic rotation of logfiles will
-					# happen after that much log output.
-					# 0 disables.
-#log_truncate_on_rotation = off		# If on, an existing log file with the
-					# same name as the new log file will be
-					# truncated rather than appended to.
-					# But such truncation only occurs on
-					# time-driven rotation, not on restarts
-					# or size-driven rotation.  Default is
-					# off, meaning append to existing files
-					# in all cases.
-
-# These are relevant when logging to syslog:
-#syslog_facility = 'LOCAL0'
-#syslog_ident = 'postgres'
-#syslog_sequence_numbers = on
-#syslog_split_messages = on
-
-# This is only relevant when logging to eventlog (Windows):
-# (change requires restart)
-#event_source = 'PostgreSQL'
-
-# - When to Log -
-
-#log_min_messages = warning		# values in order of decreasing detail:
-					#   debug5
-					#   debug4
-					#   debug3
-					#   debug2
-					#   debug1
-					#   info
-					#   notice
-					#   warning
-					#   error
-					#   log
-					#   fatal
-					#   panic
-
-#log_min_error_statement = error	# values in order of decreasing detail:
-					#   debug5
-					#   debug4
-					#   debug3
-					#   debug2
-					#   debug1
-					#   info
-					#   notice
-					#   warning
-					#   error
-					#   log
-					#   fatal
-					#   panic (effectively off)
-
-#log_min_duration_statement = -1	# -1 is disabled, 0 logs all statements
-					# and their durations, > 0 logs only
-					# statements running at least this number
-					# of milliseconds
-
-#log_min_duration_sample = -1		# -1 is disabled, 0 logs a sample of statements
-					# and their durations, > 0 logs only a sample of
-					# statements running at least this number
-					# of milliseconds;
-					# sample fraction is determined by log_statement_sample_rate
-
-#log_statement_sample_rate = 1.0	# fraction of logged statements exceeding
-					# log_min_duration_sample to be logged;
-					# 1.0 logs all such statements, 0.0 never logs
-
-
-#log_transaction_sample_rate = 0.0	# fraction of transactions whose statements
-					# are logged regardless of their duration; 1.0 logs all
-					# statements from all transactions, 0.0 never logs
-
-#log_startup_progress_interval = 10s	# Time between progress updates for
-					# long-running startup operations.
-					# 0 disables the feature, > 0 indicates
-					# the interval in milliseconds.
-
-# - What to Log -
-
-#debug_print_parse = off
-#debug_print_rewritten = off
-#debug_print_plan = off
-#debug_pretty_print = on
-#log_autovacuum_min_duration = 10min	# log autovacuum activity;
-					# -1 disables, 0 logs all actions and
-					# their durations, > 0 logs only
-					# actions running at least this number
-					# of milliseconds.
-#log_checkpoints = on
-#log_connections = off
-#log_disconnections = off
-#log_duration = off
-#log_error_verbosity = default		# terse, default, or verbose messages
-#log_hostname = off
-log_line_prefix = '%m [%p] %q%u@%d '		# special values:
-					#   %a = application name
-					#   %u = user name
-					#   %d = database name
-					#   %r = remote host and port
-					#   %h = remote host
-					#   %b = backend type
-					#   %p = process ID
-					#   %P = process ID of parallel group leader
-					#   %t = timestamp without milliseconds
-					#   %m = timestamp with milliseconds
-					#   %n = timestamp with milliseconds (as a Unix epoch)
-					#   %Q = query ID (0 if none or not computed)
-					#   %i = command tag
-					#   %e = SQL state
-					#   %c = session ID
-					#   %l = session line number
-					#   %s = session start timestamp
-					#   %v = virtual transaction ID
-					#   %x = transaction ID (0 if none)
-					#   %q = stop here in non-session
-					#        processes
-					#   %% = '%'
-					# e.g. '<%u%%%d> '
-#log_lock_waits = off			# log lock waits >= deadlock_timeout
-#log_recovery_conflict_waits = off	# log standby recovery conflict waits
-					# >= deadlock_timeout
-#log_parameter_max_length = -1		# when logging statements, limit logged
-					# bind-parameter values to N bytes;
-					# -1 means print in full, 0 disables
-#log_parameter_max_length_on_error = 0	# when logging an error, limit logged
-					# bind-parameter values to N bytes;
-					# -1 means print in full, 0 disables
-#log_statement = 'none'			# none, ddl, mod, all
-#log_replication_commands = off
-#log_temp_files = -1			# log temporary files equal or larger
-					# than the specified size in kilobytes;
-					# -1 disables, 0 logs all temp files
-log_timezone = 'Etc/UTC'
-
-
-#------------------------------------------------------------------------------
-# PROCESS TITLE
-#------------------------------------------------------------------------------
-
-cluster_name = '15/main'			# added to process titles if nonempty
-					# (change requires restart)
-#update_process_title = on
-
-
-#------------------------------------------------------------------------------
-# STATISTICS
-#------------------------------------------------------------------------------
-
-# - Cumulative Query and Index Statistics -
-
-#track_activities = on
-#track_activity_query_size = 1024	# (change requires restart)
-#track_counts = on
-#track_io_timing = off
-#track_wal_io_timing = off
-#track_functions = none			# none, pl, all
-#stats_fetch_consistency = cache
-
-
-# - Monitoring -
-
-#compute_query_id = auto
-#log_statement_stats = off
-#log_parser_stats = off
-#log_planner_stats = off
-#log_executor_stats = off
-
-
-#------------------------------------------------------------------------------
-# AUTOVACUUM
-#------------------------------------------------------------------------------
-
-#autovacuum = on			# Enable autovacuum subprocess?  'on'
-					# requires track_counts to also be on.
-#autovacuum_max_workers = 3		# max number of autovacuum subprocesses
-					# (change requires restart)
-#autovacuum_naptime = 1min		# time between autovacuum runs
-#autovacuum_vacuum_threshold = 50	# min number of row updates before
-					# vacuum
-#autovacuum_vacuum_insert_threshold = 1000	# min number of row inserts
-					# before vacuum; -1 disables insert
-					# vacuums
-#autovacuum_analyze_threshold = 50	# min number of row updates before
-					# analyze
-#autovacuum_vacuum_scale_factor = 0.2	# fraction of table size before vacuum
-#autovacuum_vacuum_insert_scale_factor = 0.2	# fraction of inserts over table
-					# size before insert vacuum
-#autovacuum_analyze_scale_factor = 0.1	# fraction of table size before analyze
-#autovacuum_freeze_max_age = 200000000	# maximum XID age before forced vacuum
-					# (change requires restart)
-#autovacuum_multixact_freeze_max_age = 400000000	# maximum multixact age
-					# before forced vacuum
-					# (change requires restart)
-#autovacuum_vacuum_cost_delay = 2ms	# default vacuum cost delay for
-					# autovacuum, in milliseconds;
-					# -1 means use vacuum_cost_delay
-#autovacuum_vacuum_cost_limit = -1	# default vacuum cost limit for
-					# autovacuum, -1 means use
-					# vacuum_cost_limit
-
-
-#------------------------------------------------------------------------------
-# CLIENT CONNECTION DEFAULTS
-#------------------------------------------------------------------------------
-
-# - Statement Behavior -
-
-#client_min_messages = notice		# values in order of decreasing detail:
-					#   debug5
-					#   debug4
-					#   debug3
-					#   debug2
-					#   debug1
-					#   log
-					#   notice
-					#   warning
-					#   error
-#search_path = '"$user", public'	# schema names
-#row_security = on
-#default_table_access_method = 'heap'
-#default_tablespace = ''		# a tablespace name, '' uses the default
-#default_toast_compression = 'pglz'	# 'pglz' or 'lz4'
-#temp_tablespaces = ''			# a list of tablespace names, '' uses
-					# only default tablespace
-#check_function_bodies = on
-#default_transaction_isolation = 'read committed'
-#default_transaction_read_only = off
-#default_transaction_deferrable = off
-#session_replication_role = 'origin'
-#statement_timeout = 0			# in milliseconds, 0 is disabled
-#lock_timeout = 0			# in milliseconds, 0 is disabled
-#idle_in_transaction_session_timeout = 0	# in milliseconds, 0 is disabled
-#idle_session_timeout = 0		# in milliseconds, 0 is disabled
-#vacuum_freeze_table_age = 150000000
-#vacuum_freeze_min_age = 50000000
-#vacuum_failsafe_age = 1600000000
-#vacuum_multixact_freeze_table_age = 150000000
-#vacuum_multixact_freeze_min_age = 5000000
-#vacuum_multixact_failsafe_age = 1600000000
-#bytea_output = 'hex'			# hex, escape
-#xmlbinary = 'base64'
-#xmloption = 'content'
-#gin_pending_list_limit = 4MB
-
-# - Locale and Formatting -
-
-datestyle = 'iso, mdy'
-#intervalstyle = 'postgres'
-timezone = 'Etc/UTC'
-#timezone_abbreviations = 'Default'     # Select the set of available time zone
-					# abbreviations.  Currently, there are
-					#   Default
-					#   Australia (historical usage)
-					#   India
-					# You can create your own file in
-					# share/timezonesets/.
-#extra_float_digits = 1			# min -15, max 3; any value >0 actually
-					# selects precise output mode
-#client_encoding = sql_ascii		# actually, defaults to database
-					# encoding
-
-# These settings are initialized by initdb, but they can be changed.
-lc_messages = 'C.UTF-8'			# locale for system error message
-					# strings
-lc_monetary = 'C.UTF-8'			# locale for monetary formatting
-lc_numeric = 'C.UTF-8'			# locale for number formatting
-lc_time = 'C.UTF-8'				# locale for time formatting
-
-# default configuration for text search
-default_text_search_config = 'pg_catalog.english'
-
-# - Shared Library Preloading -
-
-#local_preload_libraries = ''
-#session_preload_libraries = ''
-#shared_preload_libraries = ''	# (change requires restart)
-#jit_provider = 'llvmjit'		# JIT library to use
-
-# - Other Defaults -
-
-#dynamic_library_path = '$libdir'
-#extension_destdir = ''			# prepend path when loading extensions
-					# and shared objects (added by Debian)
-#gin_fuzzy_search_limit = 0
-
-
-#------------------------------------------------------------------------------
-# LOCK MANAGEMENT
-#------------------------------------------------------------------------------
-
-#deadlock_timeout = 1s
-#max_locks_per_transaction = 64		# min 10
-					# (change requires restart)
-#max_pred_locks_per_transaction = 64	# min 10
-					# (change requires restart)
-#max_pred_locks_per_relation = -2	# negative values mean
-					# (max_pred_locks_per_transaction
-					#  / -max_pred_locks_per_relation) - 1
-#max_pred_locks_per_page = 2            # min 0
-
-
-#------------------------------------------------------------------------------
-# VERSION AND PLATFORM COMPATIBILITY
-#------------------------------------------------------------------------------
-
-# - Previous PostgreSQL Versions -
-
-#array_nulls = on
-#backslash_quote = safe_encoding	# on, off, or safe_encoding
-#escape_string_warning = on
-#lo_compat_privileges = off
-#quote_all_identifiers = off
-#standard_conforming_strings = on
-#synchronize_seqscans = on
-
-# - Other Platforms and Clients -
-
-#transform_null_equals = off
-
-
-#------------------------------------------------------------------------------
-# ERROR HANDLING
-#------------------------------------------------------------------------------
-
-#exit_on_error = off			# terminate session on any error?
-#restart_after_crash = on		# reinitialize after backend crash?
-#data_sync_retry = off			# retry or panic on failure to fsync
-					# data?
-					# (change requires restart)
-#recovery_init_sync_method = fsync	# fsync, syncfs (Linux 5.8+)
-
-
-#------------------------------------------------------------------------------
-# CONFIG FILE INCLUDES
-#------------------------------------------------------------------------------
-
-# These options allow settings to be loaded from files other than the
-# default postgresql.conf.  Note that these are directives, not variable
-# assignments, so they can usefully be given more than once.
-
-# include_dir = 'conf.d'			# include files ending in '.conf' from
-					# a directory, e.g., 'conf.d'
-#include_if_exists = '...'		# include file only if it exists
-#include = '...'			# include file
-
-
-#------------------------------------------------------------------------------
-# CUSTOMIZED OPTIONS
-#------------------------------------------------------------------------------
-
-# Add settings for extensions here

aio/supervisord-app

@@ -1,71 +0,0 @@
-
-[program:web]
-command=node /app/web/web/server.js
-autostart=true
-autorestart=true
-stdout_logfile=/dev/stdout
-stdout_logfile_maxbytes=0
-stderr_logfile=/dev/stdout
-stderr_logfile_maxbytes=0
-environment=PORT=3001,HOSTNAME=0.0.0.0
-
-[program:space]
-command=node /app/space/space/server.js
-autostart=true
-autorestart=true
-stdout_logfile=/dev/stdout
-stdout_logfile_maxbytes=0
-stderr_logfile=/dev/stdout
-stderr_logfile_maxbytes=0
-environment=PORT=3002,HOSTNAME=0.0.0.0
-
-[program:admin]
-command=node /app/admin/admin/server.js
-autostart=true
-autorestart=true
-stdout_logfile=/dev/stdout
-stdout_logfile_maxbytes=0
-stderr_logfile=/dev/stdout
-stderr_logfile_maxbytes=0
-environment=PORT=3003,HOSTNAME=0.0.0.0
-
-[program:migrator]
-directory=/app/api
-command=sh -c "./bin/docker-entrypoint-migrator.sh"
-autostart=true
-autorestart=false
-stdout_logfile=/dev/stdout
-stdout_logfile_maxbytes=0
-stderr_logfile=/dev/stdout
-stderr_logfile_maxbytes=0
-
-[program:api]
-directory=/app/api
-command=sh -c "./bin/docker-entrypoint-api.sh"
-autostart=true
-autorestart=true
-stdout_logfile=/dev/stdout
-stdout_logfile_maxbytes=0
-stderr_logfile=/dev/stdout
-stderr_logfile_maxbytes=0
-
-[program:worker]
-directory=/app/api
-command=sh -c "./bin/docker-entrypoint-worker.sh"
-autostart=true
-autorestart=true
-stdout_logfile=/dev/stdout
-stdout_logfile_maxbytes=0
-stderr_logfile=/dev/stdout
-stderr_logfile_maxbytes=0
-
-[program:beat]
-directory=/app/api
-command=sh -c "./bin/docker-entrypoint-beat.sh"
-autostart=true
-autorestart=true
-stdout_logfile=/dev/stdout
-stdout_logfile_maxbytes=0
-stderr_logfile=/dev/stdout
-stderr_logfile_maxbytes=0
-

aio/supervisord-full-base

@@ -1,38 +0,0 @@
-[supervisord]
-user=root
-nodaemon=true
-stderr_logfile=/app/logs/error/supervisor.err.log
-stdout_logfile=/app/logs/access/supervisor.log
-
-[program:redis]
-directory=/app/data/redis
-command=redis-server
-autostart=true
-autorestart=true
-stderr_logfile=/app/logs/error/redis.err.log
-stdout_logfile=/app/logs/access/redis.log
-
-[program:postgresql]
-user=postgres
-command=/usr/lib/postgresql/15/bin/postgres --config-file=/etc/postgresql/postgresql.conf
-autostart=true
-autorestart=true
-stderr_logfile=/app/logs/error/postgresql.err.log
-stdout_logfile=/app/logs/access/postgresql.log
-
-[program:minio]
-directory=/app/data/minio
-command=minio server /app/data/minio
-autostart=true
-autorestart=true
-stderr_logfile=/app/logs/error/minio.err.log
-stdout_logfile=/app/logs/access/minio.log
-
-[program:nginx]
-directory=/app/data/nginx
-command=/app/nginx-start.sh
-autostart=true
-autorestart=true
-stderr_logfile=/app/logs/error/nginx.err.log
-stdout_logfile=/app/logs/access/nginx.log
-

aio/supervisord-slim-base

@@ -1,14 +0,0 @@
-[supervisord]
-user=root
-nodaemon=true
-stderr_logfile=/app/logs/error/supervisor.err.log
-stdout_logfile=/app/logs/access/supervisor.log
-
-[program:nginx]
-directory=/app/data/nginx
-command=/app/nginx-start.sh
-autostart=true
-autorestart=true
-stderr_logfile=/app/logs/error/nginx.err.log
-stdout_logfile=/app/logs/access/nginx.log
-

apiserver/Procfile

@@ -1,3 +0,0 @@
-web: gunicorn -w 4 -k uvicorn.workers.UvicornWorker plane.asgi:application --bind 0.0.0.0:$PORT --max-requests 10000 --max-requests-jitter 1000 --access-logfile -
-worker: celery -A plane worker -l info
-beat: celery -A plane beat -l INFO

apiserver/back_migration.py

@@ -1,224 +0,0 @@
-# All the python scripts that are used for back migrations
-import uuid
-import random
-from django.contrib.auth.hashers import make_password
-from plane.db.models import ProjectIdentifier
-from plane.db.models import (
-    Issue,
-    IssueComment,
-    User,
-    Project,
-    ProjectMember,
-    Label,
-    Integration,
-)
-
-
-# Update description and description html values for old descriptions
-def update_description():
-    try:
-        issues = Issue.objects.all()
-        updated_issues = []
-
-        for issue in issues:
-            issue.description_html = f"<p>{issue.description}</p>"
-            issue.description_stripped = issue.description
-            updated_issues.append(issue)
-
-        Issue.objects.bulk_update(
-            updated_issues, ["description_html", "description_stripped"], batch_size=100
-        )
-        print("Success")
-    except Exception as e:
-        print(e)
-        print("Failed")
-
-
-def update_comments():
-    try:
-        issue_comments = IssueComment.objects.all()
-        updated_issue_comments = []
-
-        for issue_comment in issue_comments:
-            issue_comment.comment_html = f"<p>{issue_comment.comment_stripped}</p>"
-            updated_issue_comments.append(issue_comment)
-
-        IssueComment.objects.bulk_update(
-            updated_issue_comments, ["comment_html"], batch_size=100
-        )
-        print("Success")
-    except Exception as e:
-        print(e)
-        print("Failed")
-
-
-def update_project_identifiers():
-    try:
-        project_identifiers = ProjectIdentifier.objects.filter(
-            workspace_id=None
-        ).select_related("project", "project__workspace")
-        updated_identifiers = []
-
-        for identifier in project_identifiers:
-            identifier.workspace_id = identifier.project.workspace_id
-            updated_identifiers.append(identifier)
-
-        ProjectIdentifier.objects.bulk_update(
-            updated_identifiers, ["workspace_id"], batch_size=50
-        )
-        print("Success")
-    except Exception as e:
-        print(e)
-        print("Failed")
-
-
-def update_user_empty_password():
-    try:
-        users = User.objects.filter(password="")
-        updated_users = []
-
-        for user in users:
-            user.password = make_password(uuid.uuid4().hex)
-            user.is_password_autoset = True
-            updated_users.append(user)
-
-        User.objects.bulk_update(updated_users, ["password"], batch_size=50)
-        print("Success")
-
-    except Exception as e:
-        print(e)
-        print("Failed")
-
-
-def updated_issue_sort_order():
-    try:
-        issues = Issue.objects.all()
-        updated_issues = []
-
-        for issue in issues:
-            issue.sort_order = issue.sequence_id * random.randint(100, 500)
-            updated_issues.append(issue)
-
-        Issue.objects.bulk_update(updated_issues, ["sort_order"], batch_size=100)
-        print("Success")
-    except Exception as e:
-        print(e)
-        print("Failed")
-
-
-def update_project_cover_images():
-    try:
-        project_cover_images = [
-            "https://images.unsplash.com/photo-1677432658720-3d84f9d657b4?ixlib=rb-4.0.3&ixid=MnwxMjA3fDB8MHxwaG90by1wYWdlfHx8fGVufDB8fHx8&auto=format&fit=crop&w=1170&q=80",
-            "https://images.unsplash.com/photo-1661107564401-57497d8fe86f?ixlib=rb-4.0.3&ixid=MnwxMjA3fDB8MHxwaG90by1wYWdlfHx8fGVufDB8fHx8&auto=format&fit=crop&w=1332&q=80",
-            "https://images.unsplash.com/photo-1677352241429-dc90cfc7a623?ixlib=rb-4.0.3&ixid=MnwxMjA3fDB8MHxwaG90by1wYWdlfHx8fGVufDB8fHx8&auto=format&fit=crop&w=1332&q=80",
-            "https://images.unsplash.com/photo-1677196728306-eeafea692454?ixlib=rb-4.0.3&ixid=MnwxMjA3fDB8MHxwaG90by1wYWdlfHx8fGVufDB8fHx8&auto=format&fit=crop&w=1331&q=80",
-            "https://images.unsplash.com/photo-1660902179734-c94c944f7830?ixlib=rb-4.0.3&ixid=MnwxMjA3fDB8MHxwaG90by1wYWdlfHx8fGVufDB8fHx8&auto=format&fit=crop&w=1255&q=80",
-            "https://images.unsplash.com/photo-1672243775941-10d763d9adef?ixlib=rb-4.0.3&ixid=MnwxMjA3fDB8MHxwaG90by1wYWdlfHx8fGVufDB8fHx8&auto=format&fit=crop&w=1170&q=80",
-            "https://images.unsplash.com/photo-1677040628614-53936ff66632?ixlib=rb-4.0.3&ixid=MnwxMjA3fDB8MHxwaG90by1wYWdlfHx8fGVufDB8fHx8&auto=format&fit=crop&w=1170&q=80",
-            "https://images.unsplash.com/photo-1676920410907-8d5f8dd4b5ba?ixlib=rb-4.0.3&ixid=MnwxMjA3fDB8MHxwaG90by1wYWdlfHx8fGVufDB8fHx8&auto=format&fit=crop&w=1332&q=80",
-            "https://images.unsplash.com/photo-1676846328604-ce831c481346?ixlib=rb-4.0.3&ixid=MnwxMjA3fDB8MHxwaG90by1wYWdlfHx8fGVufDB8fHx8&auto=format&fit=crop&w=1155&q=80",
-            "https://images.unsplash.com/photo-1676744843212-09b7e64c3a05?ixlib=rb-4.0.3&ixid=MnwxMjA3fDB8MHxwaG90by1wYWdlfHx8fGVufDB8fHx8&auto=format&fit=crop&w=1170&q=80",
-            "https://images.unsplash.com/photo-1676798531090-1608bedeac7b?ixlib=rb-4.0.3&ixid=MnwxMjA3fDB8MHxwaG90by1wYWdlfHx8fGVufDB8fHx8&auto=format&fit=crop&w=1170&q=80",
-            "https://images.unsplash.com/photo-1597088758740-56fd7ec8a3f0?ixlib=rb-4.0.3&ixid=MnwxMjA3fDB8MHxwaG90by1wYWdlfHx8fGVufDB8fHx8&auto=format&fit=crop&w=1169&q=80",
-            "https://images.unsplash.com/photo-1676638392418-80aad7c87b96?ixlib=rb-4.0.3&ixid=MnwxMjA3fDB8MHxwaG90by1wYWdlfHx8fGVufDB8fHx8&auto=format&fit=crop&w=774&q=80",
-            "https://images.unsplash.com/photo-1649639194967-2fec0b4ea7bc?ixlib=rb-4.0.3&ixid=MnwxMjA3fDB8MHxwaG90by1wYWdlfHx8fGVufDB8fHx8&auto=format&fit=crop&w=1170&q=80",
-            "https://images.unsplash.com/photo-1675883086902-b453b3f8146e?ixlib=rb-4.0.3&ixid=MnwxMjA3fDB8MHxwaG90by1wYWdlfHx8fGVufDB8fHx8&auto=format&fit=crop&w=774&q=80",
-            "https://images.unsplash.com/photo-1675887057159-40fca28fdc5d?ixlib=rb-4.0.3&ixid=MnwxMjA3fDB8MHxwaG90by1wYWdlfHx8fGVufDB8fHx8&auto=format&fit=crop&w=1173&q=80",
-            "https://images.unsplash.com/photo-1675373980203-f84c5a672aa5?ixlib=rb-4.0.3&ixid=MnwxMjA3fDB8MHxwaG90by1wYWdlfHx8fGVufDB8fHx8&auto=format&fit=crop&w=1170&q=80",
-            "https://images.unsplash.com/photo-1675191475318-d2bf6bad1200?ixlib=rb-4.0.3&ixid=MnwxMjA3fDB8MHxwaG90by1wYWdlfHx8fGVufDB8fHx8&auto=format&fit=crop&w=1332&q=80",
-            "https://images.unsplash.com/photo-1675456230532-2194d0c4bcc0?ixlib=rb-4.0.3&ixid=MnwxMjA3fDB8MHxwaG90by1wYWdlfHx8fGVufDB8fHx8&auto=format&fit=crop&w=1170&q=80",
-            "https://images.unsplash.com/photo-1675371788315-60fa0ef48267?ixlib=rb-4.0.3&ixid=MnwxMjA3fDB8MHxwaG90by1wYWdlfHx8fGVufDB8fHx8&auto=format&fit=crop&w=1332&q=80",
-        ]
-
-        projects = Project.objects.all()
-        updated_projects = []
-        for project in projects:
-            project.cover_image = project_cover_images[random.randint(0, 19)]
-            updated_projects.append(project)
-
-        Project.objects.bulk_update(updated_projects, ["cover_image"], batch_size=100)
-        print("Success")
-    except Exception as e:
-        print(e)
-        print("Failed")
-
-
-def update_user_view_property():
-    try:
-        project_members = ProjectMember.objects.all()
-        updated_project_members = []
-        for project_member in project_members:
-            project_member.default_props = {
-                "filters": {"type": None},
-                "orderBy": "-created_at",
-                "collapsed": True,
-                "issueView": "list",
-                "filterIssue": None,
-                "groupByProperty": None,
-                "showEmptyGroups": True,
-            }
-            updated_project_members.append(project_member)
-
-        ProjectMember.objects.bulk_update(
-            updated_project_members, ["default_props"], batch_size=100
-        )
-        print("Success")
-    except Exception as e:
-        print(e)
-        print("Failed")
-
-
-def update_label_color():
-    try:
-        labels = Label.objects.filter(color="")
-        updated_labels = []
-        for label in labels:
-            label.color = f"#{random.randint(0, 0xFFFFFF+1):06X}"
-            updated_labels.append(label)
-
-        Label.objects.bulk_update(updated_labels, ["color"], batch_size=100)
-        print("Success")
-    except Exception as e:
-        print(e)
-        print("Failed")
-
-
-def create_slack_integration():
-    try:
-        _ = Integration.objects.create(provider="slack", network=2, title="Slack")
-        print("Success")
-    except Exception as e:
-        print(e)
-        print("Failed")
-
-
-def update_integration_verified():
-    try:
-        integrations = Integration.objects.all()
-        updated_integrations = []
-        for integration in integrations:
-            integration.verified = True
-            updated_integrations.append(integration)
-
-        Integration.objects.bulk_update(
-            updated_integrations, ["verified"], batch_size=10
-        )
-        print("Success")
-    except Exception as e:
-        print(e)
-        print("Failed")
-
-
-def update_start_date():
-    try:
-        issues = Issue.objects.filter(state__group__in=["started", "completed"])
-        updated_issues = []
-        for issue in issues:
-            issue.start_date = issue.created_at.date()
-            updated_issues.append(issue)
-        Issue.objects.bulk_update(updated_issues, ["start_date"], batch_size=500)
-        print("Success")
-    except Exception as e:
-        print(e)
-        print("Failed")

apiserver/plane/api/apps.py

@@ -1,5 +0,0 @@
-from django.apps import AppConfig
-
-
-class ApiConfig(AppConfig):
-    name = "plane.api"

apiserver/plane/api/serializers/__init__.py

@@ -1,18 +0,0 @@
-from .user import UserLiteSerializer
-from .workspace import WorkspaceLiteSerializer
-from .project import ProjectSerializer, ProjectLiteSerializer
-from .issue import (
-    IssueSerializer,
-    LabelSerializer,
-    IssueLinkSerializer,
-    IssueCommentSerializer,
-    IssueAttachmentSerializer,
-    IssueActivitySerializer,
-    IssueExpandSerializer,
-    IssueLiteSerializer,
-)
-from .state import StateLiteSerializer, StateSerializer
-from .cycle import CycleSerializer, CycleIssueSerializer, CycleLiteSerializer
-from .module import ModuleSerializer, ModuleIssueSerializer, ModuleLiteSerializer
-from .intake import IntakeIssueSerializer
-from .estimate import EstimatePointSerializer

apiserver/plane/api/serializers/intake.py

@@ -1,24 +0,0 @@
-# Module improts
-from .base import BaseSerializer
-from .issue import IssueExpandSerializer
-from plane.db.models import IntakeIssue
-from rest_framework import serializers
-
-
-class IntakeIssueSerializer(BaseSerializer):
-    issue_detail = IssueExpandSerializer(read_only=True, source="issue")
-    inbox = serializers.UUIDField(source="intake.id", read_only=True)
-
-    class Meta:
-        model = IntakeIssue
-        fields = "__all__"
-        read_only_fields = [
-            "id",
-            "workspace",
-            "project",
-            "issue",
-            "created_by",
-            "updated_by",
-            "created_at",
-            "updated_at",
-        ]

apiserver/plane/api/serializers/project.py

@@ -1,98 +0,0 @@
-# Third party imports
-from rest_framework import serializers
-
-# Module imports
-from plane.db.models import Project, ProjectIdentifier, WorkspaceMember
-
-from .base import BaseSerializer
-
-
-class ProjectSerializer(BaseSerializer):
-    total_members = serializers.IntegerField(read_only=True)
-    total_cycles = serializers.IntegerField(read_only=True)
-    total_modules = serializers.IntegerField(read_only=True)
-    is_member = serializers.BooleanField(read_only=True)
-    sort_order = serializers.FloatField(read_only=True)
-    member_role = serializers.IntegerField(read_only=True)
-    is_deployed = serializers.BooleanField(read_only=True)
-    cover_image_url = serializers.CharField(read_only=True)
-
-    class Meta:
-        model = Project
-        fields = "__all__"
-        read_only_fields = [
-            "id",
-            "emoji",
-            "workspace",
-            "created_at",
-            "updated_at",
-            "created_by",
-            "updated_by",
-            "deleted_at",
-            "cover_image_url",
-        ]
-
-    def validate(self, data):
-        # Check project lead should be a member of the workspace
-        if (
-            data.get("project_lead", None) is not None
-            and not WorkspaceMember.objects.filter(
-                workspace_id=self.context["workspace_id"],
-                member_id=data.get("project_lead"),
-            ).exists()
-        ):
-            raise serializers.ValidationError(
-                "Project lead should be a user in the workspace"
-            )
-
-        # Check default assignee should be a member of the workspace
-        if (
-            data.get("default_assignee", None) is not None
-            and not WorkspaceMember.objects.filter(
-                workspace_id=self.context["workspace_id"],
-                member_id=data.get("default_assignee"),
-            ).exists()
-        ):
-            raise serializers.ValidationError(
-                "Default assignee should be a user in the workspace"
-            )
-
-        return data
-
-    def create(self, validated_data):
-        identifier = validated_data.get("identifier", "").strip().upper()
-        if identifier == "":
-            raise serializers.ValidationError(detail="Project Identifier is required")
-
-        if ProjectIdentifier.objects.filter(
-            name=identifier, workspace_id=self.context["workspace_id"]
-        ).exists():
-            raise serializers.ValidationError(detail="Project Identifier is taken")
-
-        project = Project.objects.create(
-            **validated_data, workspace_id=self.context["workspace_id"]
-        )
-        _ = ProjectIdentifier.objects.create(
-            name=project.identifier,
-            project=project,
-            workspace_id=self.context["workspace_id"],
-        )
-        return project
-
-
-class ProjectLiteSerializer(BaseSerializer):
-    cover_image_url = serializers.CharField(read_only=True)
-
-    class Meta:
-        model = Project
-        fields = [
-            "id",
-            "identifier",
-            "name",
-            "cover_image",
-            "icon_prop",
-            "emoji",
-            "description",
-            "cover_image_url",
-        ]
-        read_only_fields = fields

apiserver/plane/api/urls/issue.py

@@ -1,79 +0,0 @@
-from django.urls import path
-
-from plane.api.views import (
-    IssueAPIEndpoint,
-    LabelAPIEndpoint,
-    IssueLinkAPIEndpoint,
-    IssueCommentAPIEndpoint,
-    IssueActivityAPIEndpoint,
-    WorkspaceIssueAPIEndpoint,
-    IssueAttachmentEndpoint,
-)
-
-urlpatterns = [
-    path(
-        "workspaces/<str:slug>/issues/<str:project__identifier>-<str:issue__identifier>/",
-        WorkspaceIssueAPIEndpoint.as_view(),
-        name="issue-by-identifier",
-    ),
-    path(
-        "workspaces/<str:slug>/projects/<uuid:project_id>/issues/",
-        IssueAPIEndpoint.as_view(),
-        name="issue",
-    ),
-    path(
-        "workspaces/<str:slug>/projects/<uuid:project_id>/issues/<uuid:pk>/",
-        IssueAPIEndpoint.as_view(),
-        name="issue",
-    ),
-    path(
-        "workspaces/<str:slug>/projects/<uuid:project_id>/labels/",
-        LabelAPIEndpoint.as_view(),
-        name="label",
-    ),
-    path(
-        "workspaces/<str:slug>/projects/<uuid:project_id>/labels/<uuid:pk>/",
-        LabelAPIEndpoint.as_view(),
-        name="label",
-    ),
-    path(
-        "workspaces/<str:slug>/projects/<uuid:project_id>/issues/<uuid:issue_id>/links/",
-        IssueLinkAPIEndpoint.as_view(),
-        name="link",
-    ),
-    path(
-        "workspaces/<str:slug>/projects/<uuid:project_id>/issues/<uuid:issue_id>/links/<uuid:pk>/",
-        IssueLinkAPIEndpoint.as_view(),
-        name="link",
-    ),
-    path(
-        "workspaces/<str:slug>/projects/<uuid:project_id>/issues/<uuid:issue_id>/comments/",
-        IssueCommentAPIEndpoint.as_view(),
-        name="comment",
-    ),
-    path(
-        "workspaces/<str:slug>/projects/<uuid:project_id>/issues/<uuid:issue_id>/comments/<uuid:pk>/",
-        IssueCommentAPIEndpoint.as_view(),
-        name="comment",
-    ),
-    path(
-        "workspaces/<str:slug>/projects/<uuid:project_id>/issues/<uuid:issue_id>/activities/",
-        IssueActivityAPIEndpoint.as_view(),
-        name="activity",
-    ),
-    path(
-        "workspaces/<str:slug>/projects/<uuid:project_id>/issues/<uuid:issue_id>/activities/<uuid:pk>/",
-        IssueActivityAPIEndpoint.as_view(),
-        name="activity",
-    ),
-    path(
-        "workspaces/<str:slug>/projects/<uuid:project_id>/issues/<uuid:issue_id>/issue-attachments/",
-        IssueAttachmentEndpoint.as_view(),
-        name="attachment",
-    ),
-    path(
-        "workspaces/<str:slug>/projects/<uuid:project_id>/issues/<uuid:issue_id>/issue-attachments/<uuid:pk>/",
-        IssueAttachmentEndpoint.as_view(),
-        name="issue-attachment",
-    ),
-]

apiserver/plane/api/urls/member.py

@@ -1,11 +0,0 @@
-from django.urls import path
-
-from plane.api.views import ProjectMemberAPIEndpoint
-
-urlpatterns = [
-    path(
-        "workspaces/<str:slug>/projects/<str:project_id>/members/",
-        ProjectMemberAPIEndpoint.as_view(),
-        name="users",
-    )
-]

apiserver/plane/api/urls/module.py

@@ -1,40 +0,0 @@
-from django.urls import path
-
-from plane.api.views import (
-    ModuleAPIEndpoint,
-    ModuleIssueAPIEndpoint,
-    ModuleArchiveUnarchiveAPIEndpoint,
-)
-
-urlpatterns = [
-    path(
-        "workspaces/<str:slug>/projects/<uuid:project_id>/modules/",
-        ModuleAPIEndpoint.as_view(),
-        name="modules",
-    ),
-    path(
-        "workspaces/<str:slug>/projects/<uuid:project_id>/modules/<uuid:pk>/",
-        ModuleAPIEndpoint.as_view(),
-        name="modules",
-    ),
-    path(
-        "workspaces/<str:slug>/projects/<uuid:project_id>/modules/<uuid:module_id>/module-issues/",
-        ModuleIssueAPIEndpoint.as_view(),
-        name="module-issues",
-    ),
-    path(
-        "workspaces/<str:slug>/projects/<uuid:project_id>/modules/<uuid:module_id>/module-issues/<uuid:issue_id>/",
-        ModuleIssueAPIEndpoint.as_view(),
-        name="module-issues",
-    ),
-    path(
-        "workspaces/<str:slug>/projects/<uuid:project_id>/modules/<uuid:pk>/archive/",
-        ModuleArchiveUnarchiveAPIEndpoint.as_view(),
-        name="module-archive-unarchive",
-    ),
-    path(
-        "workspaces/<str:slug>/projects/<uuid:project_id>/archived-modules/",
-        ModuleArchiveUnarchiveAPIEndpoint.as_view(),
-        name="module-archive-unarchive",
-    ),
-]

apiserver/plane/api/urls/project.py

@@ -1,19 +0,0 @@
-from django.urls import path
-
-from plane.api.views import ProjectAPIEndpoint, ProjectArchiveUnarchiveAPIEndpoint
-
-urlpatterns = [
-    path(
-        "workspaces/<str:slug>/projects/", ProjectAPIEndpoint.as_view(), name="project"
-    ),
-    path(
-        "workspaces/<str:slug>/projects/<uuid:pk>/",
-        ProjectAPIEndpoint.as_view(),
-        name="project",
-    ),
-    path(
-        "workspaces/<str:slug>/projects/<uuid:project_id>/archive/",
-        ProjectArchiveUnarchiveAPIEndpoint.as_view(),
-        name="project-archive-unarchive",
-    ),
-]

apiserver/plane/api/views/__init__.py

@@ -1,30 +0,0 @@
-from .project import ProjectAPIEndpoint, ProjectArchiveUnarchiveAPIEndpoint
-
-from .state import StateAPIEndpoint
-
-from .issue import (
-    WorkspaceIssueAPIEndpoint,
-    IssueAPIEndpoint,
-    LabelAPIEndpoint,
-    IssueLinkAPIEndpoint,
-    IssueCommentAPIEndpoint,
-    IssueActivityAPIEndpoint,
-    IssueAttachmentEndpoint,
-)
-
-from .cycle import (
-    CycleAPIEndpoint,
-    CycleIssueAPIEndpoint,
-    TransferCycleIssueAPIEndpoint,
-    CycleArchiveUnarchiveAPIEndpoint,
-)
-
-from .module import (
-    ModuleAPIEndpoint,
-    ModuleIssueAPIEndpoint,
-    ModuleArchiveUnarchiveAPIEndpoint,
-)
-
-from .member import ProjectMemberAPIEndpoint
-
-from .intake import IntakeIssueAPIEndpoint

apiserver/plane/api/views/member.py

@@ -1,132 +0,0 @@
-# Python imports
-import uuid
-
-# Django imports
-from django.contrib.auth.hashers import make_password
-from django.core.validators import validate_email
-from django.core.exceptions import ValidationError
-
-# Third Party imports
-from rest_framework.response import Response
-from rest_framework import status
-
-# Module imports
-from .base import BaseAPIView
-from plane.api.serializers import UserLiteSerializer
-from plane.db.models import User, Workspace, Project, WorkspaceMember, ProjectMember
-
-from plane.app.permissions import ProjectMemberPermission
-
-
-# API endpoint to get and insert users inside the workspace
-class ProjectMemberAPIEndpoint(BaseAPIView):
-    permission_classes = [ProjectMemberPermission]
-
-    # Get all the users that are present inside the workspace
-    def get(self, request, slug, project_id):
-        # Check if the workspace exists
-        if not Workspace.objects.filter(slug=slug).exists():
-            return Response(
-                {"error": "Provided workspace does not exist"},
-                status=status.HTTP_400_BAD_REQUEST,
-            )
-
-        # Get the workspace members that are present inside the workspace
-        project_members = ProjectMember.objects.filter(
-            project_id=project_id, workspace__slug=slug
-        ).values_list("member_id", flat=True)
-
-        # Get all the users that are present inside the workspace
-        users = UserLiteSerializer(
-            User.objects.filter(id__in=project_members), many=True
-        ).data
-
-        return Response(users, status=status.HTTP_200_OK)
-
-    # Insert a new user inside the workspace, and assign the user to the project
-    def post(self, request, slug, project_id):
-        # Check if user with email already exists, and send bad request if it's
-        # not present, check for workspace and valid project mandat
-        # ------------------- Validation -------------------
-        if (
-            request.data.get("email") is None
-            or request.data.get("display_name") is None
-        ):
-            return Response(
-                {
-                    "error": "Expected email, display_name, workspace_slug, project_id, one or more of the fields are missing."
-                },
-                status=status.HTTP_400_BAD_REQUEST,
-            )
-
-        email = request.data.get("email")
-
-        try:
-            validate_email(email)
-        except ValidationError:
-            return Response(
-                {"error": "Invalid email provided"}, status=status.HTTP_400_BAD_REQUEST
-            )
-
-        workspace = Workspace.objects.filter(slug=slug).first()
-        project = Project.objects.filter(pk=project_id).first()
-
-        if not all([workspace, project]):
-            return Response(
-                {"error": "Provided workspace or project does not exist"},
-                status=status.HTTP_400_BAD_REQUEST,
-            )
-
-        # Check if user exists
-        user = User.objects.filter(email=email).first()
-        workspace_member = None
-        project_member = None
-
-        if user:
-            # Check if user is part of the workspace
-            workspace_member = WorkspaceMember.objects.filter(
-                workspace=workspace, member=user
-            ).first()
-            if workspace_member:
-                # Check if user is part of the project
-                project_member = ProjectMember.objects.filter(
-                    project=project, member=user
-                ).first()
-                if project_member:
-                    return Response(
-                        {"error": "User is already part of the workspace and project"},
-                        status=status.HTTP_400_BAD_REQUEST,
-                    )
-
-        # If user does not exist, create the user
-        if not user:
-            user = User.objects.create(
-                email=email,
-                display_name=request.data.get("display_name"),
-                first_name=request.data.get("first_name", ""),
-                last_name=request.data.get("last_name", ""),
-                username=uuid.uuid4().hex,
-                password=make_password(uuid.uuid4().hex),
-                is_password_autoset=True,
-                is_active=False,
-            )
-            user.save()
-
-        # Create a workspace member for the user if not already a member
-        if not workspace_member:
-            workspace_member = WorkspaceMember.objects.create(
-                workspace=workspace, member=user, role=request.data.get("role", 5)
-            )
-            workspace_member.save()
-
-        # Create a project member for the user if not already a member
-        if not project_member:
-            project_member = ProjectMember.objects.create(
-                project=project, member=user, role=request.data.get("role", 5)
-            )
-            project_member.save()
-
-        # Serialize the user and return the response
-        user_data = UserLiteSerializer(user).data
-
-        return Response(user_data, status=status.HTTP_201_CREATED)

apiserver/plane/api/views/state.py

@@ -1,149 +0,0 @@
-# Django imports
-from django.db import IntegrityError
-
-# Third party imports
-from rest_framework import status
-from rest_framework.response import Response
-
-from plane.api.serializers import StateSerializer
-from plane.app.permissions import ProjectEntityPermission
-from plane.db.models import Issue, State
-
-# Module imports
-from .base import BaseAPIView
-
-
-class StateAPIEndpoint(BaseAPIView):
-    serializer_class = StateSerializer
-    model = State
-    permission_classes = [ProjectEntityPermission]
-
-    def get_queryset(self):
-        return (
-            State.objects.filter(workspace__slug=self.kwargs.get("slug"))
-            .filter(project_id=self.kwargs.get("project_id"))
-            .filter(
-                project__project_projectmember__member=self.request.user,
-                project__project_projectmember__is_active=True,
-            )
-            .filter(is_triage=False)
-            .filter(project__archived_at__isnull=True)
-            .select_related("project")
-            .select_related("workspace")
-            .distinct()
-        )
-
-    def post(self, request, slug, project_id):
-        try:
-            serializer = StateSerializer(
-                data=request.data, context={"project_id": project_id}
-            )
-            if serializer.is_valid():
-                if (
-                    request.data.get("external_id")
-                    and request.data.get("external_source")
-                    and State.objects.filter(
-                        project_id=project_id,
-                        workspace__slug=slug,
-                        external_source=request.data.get("external_source"),
-                        external_id=request.data.get("external_id"),
-                    ).exists()
-                ):
-                    state = State.objects.filter(
-                        workspace__slug=slug,
-                        project_id=project_id,
-                        external_id=request.data.get("external_id"),
-                        external_source=request.data.get("external_source"),
-                    ).first()
-                    return Response(
-                        {
-                            "error": "State with the same external id and external source already exists",
-                            "id": str(state.id),
-                        },
-                        status=status.HTTP_409_CONFLICT,
-                    )
-
-                serializer.save(project_id=project_id)
-                return Response(serializer.data, status=status.HTTP_200_OK)
-            return Response(serializer.errors, status=status.HTTP_400_BAD_REQUEST)
-        except IntegrityError:
-            state = State.objects.filter(
-                workspace__slug=slug,
-                project_id=project_id,
-                name=request.data.get("name"),
-            ).first()
-            return Response(
-                {
-                    "error": "State with the same name already exists in the project",
-                    "id": str(state.id),
-                },
-                status=status.HTTP_409_CONFLICT,
-            )
-
-    def get(self, request, slug, project_id, state_id=None):
-        if state_id:
-            serializer = StateSerializer(
-                self.get_queryset().get(pk=state_id),
-                fields=self.fields,
-                expand=self.expand,
-            )
-            return Response(serializer.data, status=status.HTTP_200_OK)
-        return self.paginate(
-            request=request,
-            queryset=(self.get_queryset()),
-            on_results=lambda states: StateSerializer(
-                states, many=True, fields=self.fields, expand=self.expand
-            ).data,
-        )
-
-    def delete(self, request, slug, project_id, state_id):
-        state = State.objects.get(
-            is_triage=False, pk=state_id, project_id=project_id, workspace__slug=slug
-        )
-
-        if state.default:
-            return Response(
-                {"error": "Default state cannot be deleted"},
-                status=status.HTTP_400_BAD_REQUEST,
-            )
-
-        # Check for any issues in the state
-        issue_exist = Issue.issue_objects.filter(state=state_id).exists()
-
-        if issue_exist:
-            return Response(
-                {"error": "The state is not empty, only empty states can be deleted"},
-                status=status.HTTP_400_BAD_REQUEST,
-            )
-
-        state.delete()
-        return Response(status=status.HTTP_204_NO_CONTENT)
-
-    def patch(self, request, slug, project_id, state_id=None):
-        state = State.objects.get(
-            workspace__slug=slug, project_id=project_id, pk=state_id
-        )
-        serializer = StateSerializer(state, data=request.data, partial=True)
-        if serializer.is_valid():
-            if (
-                request.data.get("external_id")
-                and (state.external_id != str(request.data.get("external_id")))
-                and State.objects.filter(
-                    project_id=project_id,
-                    workspace__slug=slug,
-                    external_source=request.data.get(
-                        "external_source", state.external_source
-                    ),
-                    external_id=request.data.get("external_id"),
-                ).exists()
-            ):
-                return Response(
-                    {
-                        "error": "State with the same external id and external source already exists",
-                        "id": str(state.id),
-                    },
-                    status=status.HTTP_409_CONFLICT,
-                )
-            serializer.save()
-            return Response(serializer.data, status=status.HTTP_200_OK)
-        return Response(serializer.errors, status=status.HTTP_400_BAD_REQUEST)

apiserver/plane/app/serializers/view.py

@@ -1,40 +0,0 @@
-# Third party imports
-from rest_framework import serializers
-
-# Module imports
-from .base import DynamicBaseSerializer
-from plane.db.models import IssueView
-from plane.utils.issue_filters import issue_filters
-
-
-class IssueViewSerializer(DynamicBaseSerializer):
-    is_favorite = serializers.BooleanField(read_only=True)
-
-    class Meta:
-        model = IssueView
-        fields = "__all__"
-        read_only_fields = [
-            "workspace",
-            "project",
-            "query",
-            "owned_by",
-            "access",
-            "is_locked",
-        ]
-
-    def create(self, validated_data):
-        query_params = validated_data.get("filters", {})
-        if bool(query_params):
-            validated_data["query"] = issue_filters(query_params, "POST")
-        else:
-            validated_data["query"] = {}
-        return IssueView.objects.create(**validated_data)
-
-    def update(self, instance, validated_data):
-        query_params = validated_data.get("filters", {})
-        if bool(query_params):
-            validated_data["query"] = issue_filters(query_params, "POST")
-        else:
-            validated_data["query"] = {}
-        validated_data["query"] = issue_filters(query_params, "PATCH")
-        return super().update(instance, validated_data)

apiserver/plane/space/serializer/__init__.py

@@ -1,5 +0,0 @@
-from .user import UserLiteSerializer
-
-from .issue import LabelLiteSerializer, StateLiteSerializer, IssuePublicSerializer
-
-from .state import StateSerializer, StateLiteSerializer

apiserver/plane/tests/contract/app/__init__.py

@@ -1 +0,0 @@
- 

apiserver/runtime.txt

@@ -1 +0,0 @@
-python-3.12.6

app.json

@@ -1,73 +0,0 @@
-{
-  "name": "Plane",
-  "description": "Plane helps you track your issues, epics, and product roadmaps.",
-  "repository": "http://github.com/makeplane/plane",
-  "logo": "https://avatars.githubusercontent.com/u/115727700?s=200&v=4",
-  "website": "https://plane.so/",
-  "success_url": "/",
-  "stack": "heroku-22",
-  "keywords": ["plane", "project management", "django", "next"],
-  "addons": ["heroku-postgresql:mini", "heroku-redis:mini"],
-  "buildpacks": [
-    {
-      "url": "https://github.com/heroku/heroku-buildpack-python.git"
-    },
-    {
-      "url": "https://github.com/heroku/heroku-buildpack-nodejs#v176"
-    }
-  ],
-  "env": {
-    "EMAIL_HOST": {
-      "description": "Email host to send emails from",
-      "value": ""
-    },
-    "EMAIL_HOST_USER": {
-      "description": "Email host to send emails from",
-      "value": ""
-    },
-    "EMAIL_HOST_PASSWORD": {
-      "description": "Email host to send emails from",
-      "value": ""
-    },
-    "EMAIL_FROM": {
-      "description": "Email Sender",
-      "value": ""
-    },
-    "EMAIL_PORT": {
-      "description": "The default Email PORT to use",
-      "value": "587"
-    },
-    "AWS_REGION": {
-      "description": "AWS Region to use for S3",
-      "value": "false"
-    },
-    "AWS_ACCESS_KEY_ID": {
-      "description": "AWS Access Key ID to use for S3",
-      "value": ""
-    },
-    "AWS_SECRET_ACCESS_KEY": {
-      "description": "AWS Secret Access Key to use for S3",
-      "value": ""
-    },
-    "AWS_S3_BUCKET_NAME": {
-      "description": "AWS Bucket Name to use for S3",
-      "value": ""
-    },
-    "WEB_URL": {
-      "description": "Web URL for Plane this will be used for redirections in the emails",
-      "value": ""
-    },
-    "GITHUB_CLIENT_SECRET": {
-      "description": "GitHub Client Secret",
-      "value": ""
-    },
-    "NEXT_PUBLIC_API_BASE_URL": {
-      "description": "Next Public API Base URL",
-      "value": ""
-    },
-    "SECRET_KEY": {
-      "description": "Django Secret Key",
-      "value": ""
-    }
-  }
-}

apps/admin/Dockerfile.admin

@@ -1,4 +1,4 @@
-FROM node:20-alpine as base
+FROM node:22-alpine AS base
 
 # *****************************************************************************
 # STAGE 1: Build the project
@@ -46,8 +46,8 @@ ENV NEXT_PUBLIC_SPACE_BASE_PATH=$NEXT_PUBLIC_SPACE_BASE_PATH
 ARG NEXT_PUBLIC_WEB_BASE_URL=""
 ENV NEXT_PUBLIC_WEB_BASE_URL=$NEXT_PUBLIC_WEB_BASE_URL
 
-ENV NEXT_TELEMETRY_DISABLED 1
-ENV TURBO_TELEMETRY_DISABLED 1
+ENV NEXT_TELEMETRY_DISABLED=1
+ENV TURBO_TELEMETRY_DISABLED=1
 
 RUN yarn turbo run build --filter=admin
 
@@ -57,12 +57,16 @@ RUN yarn turbo run build --filter=admin
 FROM base AS runner
 WORKDIR /app
 
-COPY --from=installer /app/admin/next.config.js .
-COPY --from=installer /app/admin/package.json .
+# Don't run production as root
+RUN addgroup --system --gid 1001 nodejs
+RUN adduser --system --uid 1001 nextjs
+USER nextjs
 
-COPY --from=installer /app/admin/.next/standalone ./
-COPY --from=installer /app/admin/.next/static ./admin/.next/static
-COPY --from=installer /app/admin/public ./admin/public
+# Automatically leverage output traces to reduce image size
+# https://nextjs.org/docs/advanced-features/output-file-tracing
+COPY --from=installer /app/apps/admin/.next/standalone ./
+COPY --from=installer /app/apps/admin/.next/static ./apps/admin/.next/static
+COPY --from=installer /app/apps/admin/public ./apps/admin/public
 
 ARG NEXT_PUBLIC_API_BASE_URL=""
 ENV NEXT_PUBLIC_API_BASE_URL=$NEXT_PUBLIC_API_BASE_URL
@@ -82,7 +86,9 @@ ENV NEXT_PUBLIC_SPACE_BASE_PATH=$NEXT_PUBLIC_SPACE_BASE_PATH
 ARG NEXT_PUBLIC_WEB_BASE_URL=""
 ENV NEXT_PUBLIC_WEB_BASE_URL=$NEXT_PUBLIC_WEB_BASE_URL
 
-ENV NEXT_TELEMETRY_DISABLED 1
-ENV TURBO_TELEMETRY_DISABLED 1
+ENV NEXT_TELEMETRY_DISABLED=1
+ENV TURBO_TELEMETRY_DISABLED=1
 
-EXPOSE 3000
+EXPOSE 3000
+
+CMD ["node", "apps/admin/server.js"]

apps/admin/Dockerfile.dev

@@ -1,4 +1,4 @@
-FROM node:20-alpine
+FROM node:22-alpine
 RUN apk add --no-cache libc6-compat
 # Set working directory
 WORKDIR /app

apps/admin/app/(all)/(dashboard)/ai/form.tsx

@@ -5,7 +5,7 @@ import { Lightbulb } from "lucide-react";
 import { IFormattedInstanceConfiguration, TInstanceAIConfigurationKeys } from "@plane/types";
 import { Button, TOAST_TYPE, setToast } from "@plane/ui";
 // components
-import { ControllerInput, TControllerInputFormField } from "@/components/common";
+import { ControllerInput, TControllerInputFormField } from "@/components/common/controller-input";
 // hooks
 import { useInstance } from "@/hooks/store";
 

apps/admin/app/(all)/(dashboard)/ai/layout.tsx

@@ -1,11 +1,10 @@
 import { ReactNode } from "react";
 import { Metadata } from "next";
-import { AdminLayout } from "@/layouts/admin-layout";
 
 export const metadata: Metadata = {
-  title: "Artificial Intelligence Settings - Plane Web",
+  title: "Artificial Intelligence Settings - God Mode",
 };
 
 export default function AILayout({ children }: { children: ReactNode }) {
-  return <AdminLayout>{children}</AdminLayout>;
+  return <>{children}</>;
 }

apps/admin/app/(all)/(dashboard)/authentication/github/form.tsx

@@ -10,14 +10,10 @@ import { IFormattedInstanceConfiguration, TInstanceGithubAuthenticationConfigura
 import { Button, TOAST_TYPE, getButtonStyling, setToast } from "@plane/ui";
 import { cn } from "@plane/utils";
 // components
-import {
-  CodeBlock,
-  ConfirmDiscardModal,
-  ControllerInput,
-  CopyField,
-  TControllerInputFormField,
-  TCopyField,
-} from "@/components/common";
+import { CodeBlock } from "@/components/common/code-block";
+import { ConfirmDiscardModal } from "@/components/common/confirm-discard-modal";
+import { ControllerInput, TControllerInputFormField } from "@/components/common/controller-input";
+import { CopyField, TCopyField } from "@/components/common/copy-field";
 // hooks
 import { useInstance } from "@/hooks/store";
 

apps/admin/app/(all)/(dashboard)/authentication/github/layout.tsx

@@ -0,0 +1,10 @@
+import { ReactNode } from "react";
+import { Metadata } from "next";
+
+export const metadata: Metadata = {
+  title: "GitHub Authentication - God Mode",
+};
+
+export default function GitHubAuthenticationLayout({ children }: { children: ReactNode }) {
+  return <>{children}</>;
+}

apps/admin/app/(all)/(dashboard)/authentication/github/page.tsx

@@ -9,8 +9,7 @@ import useSWR from "swr";
 import { Loader, ToggleSwitch, setPromiseToast } from "@plane/ui";
 import { resolveGeneralTheme } from "@plane/utils";
 // components
-import { AuthenticationMethodCard } from "@/components/authentication";
-import { PageHeader } from "@/components/common";
+import { AuthenticationMethodCard } from "@/components/authentication/authentication-method-card";
 // hooks
 import { useInstance } from "@/hooks/store";
 // icons
@@ -61,9 +60,11 @@ const InstanceGithubAuthenticationPage = observer(() => {
         setIsSubmitting(false);
       });
   };
+
+  const isGithubEnabled = enableGithubConfig === "1";
+
   return (
     <>
-      <PageHeader title="GitHub Authentication - Plane Web" />
       <div className="relative container mx-auto w-full h-full p-4 py-4 space-y-6 flex flex-col">
         <div className="border-b border-custom-border-100 mx-4 py-4 space-y-1 flex-shrink-0">
           <AuthenticationMethodCard
@@ -79,11 +80,9 @@ const InstanceGithubAuthenticationPage = observer(() => {
             }
             config={
               <ToggleSwitch
-                value={Boolean(parseInt(enableGithubConfig))}
+                value={isGithubEnabled}
                 onChange={() => {
-                  Boolean(parseInt(enableGithubConfig)) === true
-                    ? updateConfig("IS_GITHUB_ENABLED", "0")
-                    : updateConfig("IS_GITHUB_ENABLED", "1");
+                  updateConfig("IS_GITHUB_ENABLED", isGithubEnabled ? "0" : "1");
                 }}
                 size="sm"
                 disabled={isSubmitting || !formattedConfig}

apps/admin/app/(all)/(dashboard)/authentication/gitlab/form.tsx

@@ -8,14 +8,10 @@ import { IFormattedInstanceConfiguration, TInstanceGitlabAuthenticationConfigura
 import { Button, TOAST_TYPE, getButtonStyling, setToast } from "@plane/ui";
 import { cn } from "@plane/utils";
 // components
-import {
-  CodeBlock,
-  ConfirmDiscardModal,
-  ControllerInput,
-  CopyField,
-  TControllerInputFormField,
-  TCopyField,
-} from "@/components/common";
+import { CodeBlock } from "@/components/common/code-block";
+import { ConfirmDiscardModal } from "@/components/common/confirm-discard-modal";
+import { ControllerInput, TControllerInputFormField } from "@/components/common/controller-input";
+import { CopyField, TCopyField } from "@/components/common/copy-field";
 // hooks
 import { useInstance } from "@/hooks/store";
 

apps/admin/app/(all)/(dashboard)/authentication/gitlab/layout.tsx

@@ -0,0 +1,10 @@
+import { ReactNode } from "react";
+import { Metadata } from "next";
+
+export const metadata: Metadata = {
+  title: "GitLab Authentication - God Mode",
+};
+
+export default function GitlabAuthenticationLayout({ children }: { children: ReactNode }) {
+  return <>{children}</>;
+}

apps/admin/app/(all)/(dashboard)/authentication/gitlab/page.tsx

@@ -6,8 +6,7 @@ import Image from "next/image";
 import useSWR from "swr";
 import { Loader, ToggleSwitch, setPromiseToast } from "@plane/ui";
 // components
-import { AuthenticationMethodCard } from "@/components/authentication";
-import { PageHeader } from "@/components/common";
+import { AuthenticationMethodCard } from "@/components/authentication/authentication-method-card";
 // hooks
 import { useInstance } from "@/hooks/store";
 // icons
@@ -57,7 +56,6 @@ const InstanceGitlabAuthenticationPage = observer(() => {
   };
   return (
     <>
-      <PageHeader title="GitLab Authentication - Plane Web" />
       <div className="relative container mx-auto w-full h-full p-4 py-4 space-y-6 flex flex-col">
         <div className="border-b border-custom-border-100 mx-4 py-4 space-y-1 flex-shrink-0">
           <AuthenticationMethodCard
@@ -68,9 +66,11 @@ const InstanceGitlabAuthenticationPage = observer(() => {
               <ToggleSwitch
                 value={Boolean(parseInt(enableGitlabConfig))}
                 onChange={() => {
-                  Boolean(parseInt(enableGitlabConfig)) === true
-                    ? updateConfig("IS_GITLAB_ENABLED", "0")
-                    : updateConfig("IS_GITLAB_ENABLED", "1");
+                  if (Boolean(parseInt(enableGitlabConfig)) === true) {
+                    updateConfig("IS_GITLAB_ENABLED", "0");
+                  } else {
+                    updateConfig("IS_GITLAB_ENABLED", "1");
+                  }
                 }}
                 size="sm"
                 disabled={isSubmitting || !formattedConfig}

apps/admin/app/(all)/(dashboard)/authentication/google/form.tsx

@@ -9,14 +9,10 @@ import { IFormattedInstanceConfiguration, TInstanceGoogleAuthenticationConfigura
 import { Button, TOAST_TYPE, getButtonStyling, setToast } from "@plane/ui";
 import { cn } from "@plane/utils";
 // components
-import {
-  CodeBlock,
-  ConfirmDiscardModal,
-  ControllerInput,
-  CopyField,
-  TControllerInputFormField,
-  TCopyField,
-} from "@/components/common";
+import { CodeBlock } from "@/components/common/code-block";
+import { ConfirmDiscardModal } from "@/components/common/confirm-discard-modal";
+import { ControllerInput, TControllerInputFormField } from "@/components/common/controller-input";
+import { CopyField, TCopyField } from "@/components/common/copy-field";
 // hooks
 import { useInstance } from "@/hooks/store";
 

apps/admin/app/(all)/(dashboard)/authentication/google/layout.tsx

@@ -0,0 +1,10 @@
+import { ReactNode } from "react";
+import { Metadata } from "next";
+
+export const metadata: Metadata = {
+  title: "Google Authentication - God Mode",
+};
+
+export default function GoogleAuthenticationLayout({ children }: { children: ReactNode }) {
+  return <>{children}</>;
+}

apps/admin/app/(all)/(dashboard)/authentication/google/page.tsx

@@ -6,8 +6,7 @@ import Image from "next/image";
 import useSWR from "swr";
 import { Loader, ToggleSwitch, setPromiseToast } from "@plane/ui";
 // components
-import { AuthenticationMethodCard } from "@/components/authentication";
-import { PageHeader } from "@/components/common";
+import { AuthenticationMethodCard } from "@/components/authentication/authentication-method-card";
 // hooks
 import { useInstance } from "@/hooks/store";
 // icons
@@ -57,7 +56,6 @@ const InstanceGoogleAuthenticationPage = observer(() => {
   };
   return (
     <>
-      <PageHeader title="Google Authentication - Plane Web" />
       <div className="relative container mx-auto w-full h-full p-4 py-4 space-y-6 flex flex-col">
         <div className="border-b border-custom-border-100 mx-4 py-4 space-y-1 flex-shrink-0">
           <AuthenticationMethodCard
@@ -69,9 +67,11 @@ const InstanceGoogleAuthenticationPage = observer(() => {
               <ToggleSwitch
                 value={Boolean(parseInt(enableGoogleConfig))}
                 onChange={() => {
-                  Boolean(parseInt(enableGoogleConfig)) === true
-                    ? updateConfig("IS_GOOGLE_ENABLED", "0")
-                    : updateConfig("IS_GOOGLE_ENABLED", "1");
+                  if (Boolean(parseInt(enableGoogleConfig)) === true) {
+                    updateConfig("IS_GOOGLE_ENABLED", "0");
+                  } else {
+                    updateConfig("IS_GOOGLE_ENABLED", "1");
+                  }
                 }}
                 size="sm"
                 disabled={isSubmitting || !formattedConfig}

apps/admin/app/(all)/(dashboard)/authentication/layout.tsx

@@ -1,11 +1,10 @@
 import { ReactNode } from "react";
 import { Metadata } from "next";
-import { AdminLayout } from "@/layouts/admin-layout";
 
 export const metadata: Metadata = {
   title: "Authentication Settings - Plane Web",
 };
 
 export default function AuthenticationLayout({ children }: { children: ReactNode }) {
-  return <AdminLayout>{children}</AdminLayout>;
+  return <>{children}</>;
 }

apps/admin/app/(all)/(dashboard)/email/email-config-form.tsx

@@ -7,7 +7,7 @@ import { IFormattedInstanceConfiguration, TInstanceEmailConfigurationKeys } from
 // ui
 import { Button, CustomSelect, TOAST_TYPE, setToast } from "@plane/ui";
 // components
-import { ControllerInput, TControllerInputFormField } from "@/components/common";
+import { ControllerInput, TControllerInputFormField } from "@/components/common/controller-input";
 // hooks
 import { useInstance } from "@/hooks/store";
 // local components
@@ -49,9 +49,9 @@ export const InstanceEmailForm: FC<IInstanceEmailForm> = (props) => {
       EMAIL_USE_TLS: config["EMAIL_USE_TLS"],
       EMAIL_USE_SSL: config["EMAIL_USE_SSL"],
       EMAIL_FROM: config["EMAIL_FROM"],
+      ENABLE_SMTP: config["ENABLE_SMTP"],
     },
   });
-
   const emailFormFields: TControllerInputFormField[] = [
     {
       key: "EMAIL_HOST",
@@ -101,7 +101,7 @@ export const InstanceEmailForm: FC<IInstanceEmailForm> = (props) => {
   ];
 
   const onSubmit = async (formData: EmailFormValues) => {
-    const payload: Partial<EmailFormValues> = { ...formData };
+    const payload: Partial<EmailFormValues> = { ...formData, ENABLE_SMTP: "1" };
 
     await updateInstanceConfigurations(payload)
       .then(() =>

apps/admin/app/(all)/(dashboard)/email/layout.tsx

@@ -1,15 +1,14 @@
 import { ReactNode } from "react";
 import { Metadata } from "next";
-import { AdminLayout } from "@/layouts/admin-layout";
 
 interface EmailLayoutProps {
   children: ReactNode;
 }
 
 export const metadata: Metadata = {
-  title: "Email Settings - Plane Web",
+  title: "Email Settings - God Mode",
 };
 
 export default function EmailLayout({ children }: EmailLayoutProps) {
-  return <AdminLayout>{children}</AdminLayout>;
+  return <>{children}</>;
 }

apps/admin/app/(all)/(dashboard)/email/page.tsx

@@ -0,0 +1,93 @@
+"use client";
+
+import { useEffect, useState } from "react";
+import { observer } from "mobx-react";
+import useSWR from "swr";
+import { Loader, setToast, TOAST_TYPE, ToggleSwitch } from "@plane/ui";
+// hooks
+import { useInstance } from "@/hooks/store";
+// components
+import { InstanceEmailForm } from "./email-config-form";
+
+const InstanceEmailPage = observer(() => {
+  // store
+  const { fetchInstanceConfigurations, formattedConfig, disableEmail } = useInstance();
+
+  const { isLoading } = useSWR("INSTANCE_CONFIGURATIONS", () => fetchInstanceConfigurations());
+
+  const [isSubmitting, setIsSubmitting] = useState(false);
+  const [isSMTPEnabled, setIsSMTPEnabled] = useState(false);
+
+  const handleToggle = async () => {
+    if (isSMTPEnabled) {
+      setIsSubmitting(true);
+      try {
+        await disableEmail();
+        setIsSMTPEnabled(false);
+        setToast({
+          title: "Email feature disabled",
+          message: "Email feature has been disabled",
+          type: TOAST_TYPE.SUCCESS,
+        });
+      } catch (error) {
+        setToast({
+          title: "Error disabling email",
+          message: "Failed to disable email feature. Please try again.",
+          type: TOAST_TYPE.ERROR,
+        });
+      } finally {
+        setIsSubmitting(false);
+      }
+      return;
+    }
+    setIsSMTPEnabled(true);
+  };
+  useEffect(() => {
+    if (formattedConfig) {
+      setIsSMTPEnabled(formattedConfig.ENABLE_SMTP === "1");
+    }
+  }, [formattedConfig]);
+
+  return (
+    <>
+      <div className="relative container mx-auto w-full h-full p-4 py-4 space-y-6 flex flex-col">
+        <div className="flex items-center justify-between gap-4 border-b border-custom-border-100 mx-4 py-4 space-y-1 flex-shrink-0">
+          <div className="py-4 space-y-1 flex-shrink-0">
+            <div className="text-xl font-medium text-custom-text-100">Secure emails from your own instance</div>
+            <div className="text-sm font-normal text-custom-text-300">
+              Plane can send useful emails to you and your users from your own instance without talking to the Internet.
+              <div className="text-sm font-normal text-custom-text-300">
+                Set it up below and please test your settings before you save them.&nbsp;
+                <span className="text-red-400">Misconfigs can lead to email bounces and errors.</span>
+              </div>
+            </div>
+          </div>
+          {isLoading ? (
+            <Loader>
+              <Loader.Item width="24px" height="16px" className="rounded-full" />
+            </Loader>
+          ) : (
+            <ToggleSwitch value={isSMTPEnabled} onChange={handleToggle} size="sm" disabled={isSubmitting} />
+          )}
+        </div>
+        {isSMTPEnabled && !isLoading && (
+          <div className="flex-grow overflow-hidden overflow-y-scroll vertical-scrollbar scrollbar-md px-4">
+            {formattedConfig ? (
+              <InstanceEmailForm config={formattedConfig} />
+            ) : (
+              <Loader className="space-y-10">
+                <Loader.Item height="50px" width="75%" />
+                <Loader.Item height="50px" width="75%" />
+                <Loader.Item height="50px" width="40%" />
+                <Loader.Item height="50px" width="40%" />
+                <Loader.Item height="50px" width="20%" />
+              </Loader>
+            )}
+          </div>
+        )}
+      </div>
+    </>
+  );
+});
+
+export default InstanceEmailPage;

apps/admin/app/(all)/(dashboard)/general/form.tsx

@@ -8,7 +8,7 @@ import { IInstance, IInstanceAdmin } from "@plane/types";
 // ui
 import { Button, Input, TOAST_TYPE, ToggleSwitch, setToast } from "@plane/ui";
 // components
-import { ControllerInput } from "@/components/common";
+import { ControllerInput } from "@/components/common/controller-input";
 import { useInstance } from "@/hooks/store";
 import { IntercomConfig } from "./intercom";
 // hooks

apps/admin/app/(all)/(dashboard)/general/layout.tsx

@@ -1,11 +1,10 @@
 import { ReactNode } from "react";
 import { Metadata } from "next";
-import { AdminLayout } from "@/layouts/admin-layout";
 
 export const metadata: Metadata = {
-  title: "General Settings - Plane Web",
+  title: "General Settings - God Mode",
 };
 
 export default function GeneralLayout({ children }: { children: ReactNode }) {
-  return <AdminLayout>{children}</AdminLayout>;
+  return <>{children}</>;
 }

apps/admin/app/(all)/(dashboard)/header.tsx

@@ -3,16 +3,27 @@
 import { FC } from "react";
 import { observer } from "mobx-react";
 import { usePathname } from "next/navigation";
-// mobx
-// ui
-import { Settings } from "lucide-react";
+import { Menu, Settings } from "lucide-react";
 // icons
 import { Breadcrumbs } from "@plane/ui";
 // components
-import { SidebarHamburgerToggle } from "@/components/admin-sidebar";
-import { BreadcrumbLink } from "@/components/common";
+import { BreadcrumbLink } from "@/components/common/breadcrumb-link";
+// hooks
+import { useTheme } from "@/hooks/store";
 
-export const InstanceHeader: FC = observer(() => {
+export const HamburgerToggle: FC = observer(() => {
+  const { isSidebarCollapsed, toggleSidebar } = useTheme();
+  return (
+    <div
+      className="w-7 h-7 rounded flex justify-center items-center bg-custom-background-80 transition-all hover:bg-custom-background-90 cursor-pointer group md:hidden"
+      onClick={() => toggleSidebar(!isSidebarCollapsed)}
+    >
+      <Menu size={14} className="text-custom-text-200 group-hover:text-custom-text-100 transition-all" />
+    </div>
+  );
+});
+
+export const AdminHeader: FC = observer(() => {
   const pathName = usePathname();
 
   const getHeaderTitle = (pathName: string) => {
@@ -61,15 +72,14 @@ export const InstanceHeader: FC = observer(() => {
   const breadcrumbItems = generateBreadcrumbItems(pathName);
 
   return (
-    <div className="relative z-10 flex h-[3.75rem] w-full flex-shrink-0 flex-row items-center justify-between gap-x-2 gap-y-4 border-b border-custom-sidebar-border-200 bg-custom-sidebar-background-100 p-4">
+    <div className="relative z-10 flex h-header w-full flex-shrink-0 flex-row items-center justify-between gap-x-2 gap-y-4 border-b border-custom-sidebar-border-200 bg-custom-sidebar-background-100 p-4">
       <div className="flex w-full flex-grow items-center gap-2 overflow-ellipsis whitespace-nowrap">
-        <SidebarHamburgerToggle />
+        <HamburgerToggle />
         {breadcrumbItems.length >= 0 && (
           <div>
             <Breadcrumbs>
-              <Breadcrumbs.BreadcrumbItem
-                type="text"
-                link={
+              <Breadcrumbs.Item
+                component={
                   <BreadcrumbLink
                     href="/general/"
                     label="Settings"
@@ -80,10 +90,9 @@ export const InstanceHeader: FC = observer(() => {
               {breadcrumbItems.map(
                 (item) =>
                   item.title && (
-                    <Breadcrumbs.BreadcrumbItem
+                    <Breadcrumbs.Item
                       key={item.title}
-                      type="text"
-                      link={<BreadcrumbLink href={item.href} label={item.title} />}
+                      component={<BreadcrumbLink href={item.href} label={item.title} />}
                     />
                   )
               )}

apps/admin/app/(all)/(dashboard)/image/form.tsx

@@ -4,7 +4,7 @@ import { useForm } from "react-hook-form";
 import { IFormattedInstanceConfiguration, TInstanceImageConfigurationKeys } from "@plane/types";
 import { Button, TOAST_TYPE, setToast } from "@plane/ui";
 // components
-import { ControllerInput } from "@/components/common";
+import { ControllerInput } from "@/components/common/controller-input";
 // hooks
 import { useInstance } from "@/hooks/store";
 

apps/admin/app/(all)/(dashboard)/image/layout.tsx

@@ -1,15 +1,14 @@
 import { ReactNode } from "react";
 import { Metadata } from "next";
-import { AdminLayout } from "@/layouts/admin-layout";
 
 interface ImageLayoutProps {
   children: ReactNode;
 }
 
 export const metadata: Metadata = {
-  title: "Images Settings - Plane Web",
+  title: "Images Settings - God Mode",
 };
 
 export default function ImageLayout({ children }: ImageLayoutProps) {
-  return <AdminLayout>{children}</AdminLayout>;
+  return <>{children}</>;
 }

apps/admin/app/(all)/(dashboard)/layout.tsx

@@ -1,20 +1,22 @@
 "use client";
+
 import { FC, ReactNode, useEffect } from "react";
 import { observer } from "mobx-react";
 import { useRouter } from "next/navigation";
 // components
-import { InstanceSidebar } from "@/components/admin-sidebar";
-import { InstanceHeader } from "@/components/auth-header";
-import { LogoSpinner } from "@/components/common";
+import { LogoSpinner } from "@/components/common/logo-spinner";
 import { NewUserPopup } from "@/components/new-user-popup";
 // hooks
 import { useUser } from "@/hooks/store";
+// local components
+import { AdminHeader } from "./header";
+import { AdminSidebar } from "./sidebar";
 
 type TAdminLayout = {
   children: ReactNode;
 };
 
-export const AdminLayout: FC<TAdminLayout> = observer((props) => {
+const AdminLayout: FC<TAdminLayout> = (props) => {
   const { children } = props;
   // router
   const router = useRouter();
@@ -35,14 +37,20 @@ export const AdminLayout: FC<TAdminLayout> = observer((props) => {
     );
   }
 
-  return (
-    <div className="relative flex h-screen w-screen overflow-hidden">
-      <InstanceSidebar />
-      <main className="relative flex h-full w-full flex-col overflow-hidden bg-custom-background-100">
-        <InstanceHeader />
-        <div className="h-full w-full overflow-hidden">{children}</div>
-      </main>
-      <NewUserPopup />
-    </div>
-  );
-});
+  if (isUserLoggedIn) {
+    return (
+      <div className="relative flex h-screen w-screen overflow-hidden">
+        <AdminSidebar />
+        <main className="relative flex h-full w-full flex-col overflow-hidden bg-custom-background-100">
+          <AdminHeader />
+          <div className="h-full w-full overflow-hidden">{children}</div>
+        </main>
+        <NewUserPopup />
+      </div>
+    );
+  }
+
+  return <></>;
+};
+
+export default observer(AdminLayout);

apps/admin/app/(all)/(dashboard)/sidebar-dropdown.tsx

@@ -16,7 +16,7 @@ import { useTheme, useUser } from "@/hooks/store";
 // service initialization
 const authService = new AuthService();
 
-export const SidebarDropdown = observer(() => {
+export const AdminSidebarDropdown = observer(() => {
   // store hooks
   const { isSidebarCollapsed } = useTheme();
   const { currentUser, signOut } = useUser();
@@ -77,7 +77,7 @@ export const SidebarDropdown = observer(() => {
   }, [csrfToken]);
 
   return (
-    <div className="flex max-h-[3.75rem] items-center gap-x-5 gap-y-2 border-b border-custom-sidebar-border-200 px-4 py-3.5">
+    <div className="flex max-h-header items-center gap-x-5 gap-y-2 border-b border-custom-sidebar-border-200 px-4 py-3.5">
       <div className="h-full w-full truncate">
         <div
           className={`flex flex-grow items-center gap-x-2 truncate rounded py-1 ${

apps/admin/app/(all)/(dashboard)/sidebar-help-section.tsx

@@ -33,7 +33,7 @@ const helpOptions = [
   },
 ];
 
-export const HelpSection: FC = observer(() => {
+export const AdminSidebarHelpSection: FC = observer(() => {
   // states
   const [isNeedHelpOpen, setIsNeedHelpOpen] = useState(false);
   // store

apps/admin/app/(all)/(dashboard)/sidebar-menu.tsx

@@ -49,7 +49,7 @@ const INSTANCE_ADMIN_LINKS = [
   },
 ];
 
-export const SidebarMenu = observer(() => {
+export const AdminSidebarMenu = observer(() => {
   // store hooks
   const { isSidebarCollapsed, toggleSidebar } = useTheme();
   // router

apps/admin/app/(all)/(dashboard)/sidebar.tsx

@@ -4,12 +4,14 @@ import { FC, useEffect, useRef } from "react";
 import { observer } from "mobx-react";
 // plane helpers
 import { useOutsideClickDetector } from "@plane/hooks";
-// components
-import { HelpSection, SidebarMenu, SidebarDropdown } from "@/components/admin-sidebar";
 // hooks
 import { useTheme } from "@/hooks/store";
+// components
+import { AdminSidebarDropdown } from "./sidebar-dropdown";
+import { AdminSidebarHelpSection } from "./sidebar-help-section";
+import { AdminSidebarMenu } from "./sidebar-menu";
 
-export const InstanceSidebar: FC = observer(() => {
+export const AdminSidebar: FC = observer(() => {
   // store
   const { isSidebarCollapsed, toggleSidebar } = useTheme();
 
@@ -47,9 +49,9 @@ export const InstanceSidebar: FC = observer(() => {
       `}
     >
       <div ref={ref} className="flex h-full w-full flex-1 flex-col">
-        <SidebarDropdown />
-        <SidebarMenu />
-        <HelpSection />
+        <AdminSidebarDropdown />
+        <AdminSidebarMenu />
+        <AdminSidebarHelpSection />
       </div>
     </div>
   );

apps/admin/app/(all)/(dashboard)/workspace/layout.tsx

@@ -1,12 +1,10 @@
 import { ReactNode } from "react";
 import { Metadata } from "next";
-// layouts
-import { AdminLayout } from "@/layouts/admin-layout";
 
 export const metadata: Metadata = {
-  title: "Workspace Management - Plane Web",
+  title: "Workspace Management - God Mode",
 };
 
 export default function WorkspaceManagementLayout({ children }: { children: ReactNode }) {
-  return <AdminLayout>{children}</AdminLayout>;
+  return <>{children}</>;
 }

apps/admin/app/(all)/(dashboard)/workspace/page.tsx

@@ -10,7 +10,7 @@ import { TInstanceConfigurationKeys } from "@plane/types";
 import { Button, getButtonStyling, Loader, setPromiseToast, ToggleSwitch } from "@plane/ui";
 import { cn } from "@plane/utils";
 // components
-import { WorkspaceListItem } from "@/components/workspace";
+import { WorkspaceListItem } from "@/components/workspace/list-item";
 // hooks
 import { useInstance, useWorkspace } from "@/hooks/store";
 

apps/admin/app/(all)/(home)/auth-helpers.tsx

@@ -7,13 +7,11 @@ import { SUPPORT_EMAIL, EAdminAuthErrorCodes, TAdminAuthErrorInfo } from "@plane
 import { TGetBaseAuthenticationModeProps, TInstanceAuthenticationModes } from "@plane/types";
 import { resolveGeneralTheme } from "@plane/utils";
 // components
-import {
-  EmailCodesConfiguration,
-  GithubConfiguration,
-  GitlabConfiguration,
-  GoogleConfiguration,
-  PasswordLoginConfiguration,
-} from "@/components/authentication";
+import { EmailCodesConfiguration } from "@/components/authentication/email-config-switch";
+import { GithubConfiguration } from "@/components/authentication/github-config";
+import { GitlabConfiguration } from "@/components/authentication/gitlab-config";
+import { GoogleConfiguration } from "@/components/authentication/google-config";
+import { PasswordLoginConfiguration } from "@/components/authentication/password-config-switch";
 // images
 import githubLightModeImage from "@/public/logos/github-black.png";
 import githubDarkModeImage from "@/public/logos/github-white.png";

apps/admin/app/(all)/(home)/layout.tsx

@@ -1,26 +1,18 @@
 "use client";
 
-import { FC, ReactNode } from "react";
 import Image from "next/image";
 import Link from "next/link";
 import { useTheme } from "next-themes";
-// logo/ images
+// logo assets
 import PlaneBackgroundPatternDark from "public/auth/background-pattern-dark.svg";
 import PlaneBackgroundPattern from "public/auth/background-pattern.svg";
 import BlackHorizontalLogo from "public/plane-logos/black-horizontal-with-blue-logo.png";
 import WhiteHorizontalLogo from "public/plane-logos/white-horizontal-with-blue-logo.png";
 
-type TDefaultLayout = {
-  children: ReactNode;
-  withoutBackground?: boolean;
-};
-
-export const DefaultLayout: FC<TDefaultLayout> = (props) => {
-  const { children, withoutBackground = false } = props;
-  // hooks
+export default function RootLayout({ children }: { children: React.ReactNode }) {
   const { resolvedTheme } = useTheme();
-  const patternBackground = resolvedTheme === "dark" ? PlaneBackgroundPatternDark : PlaneBackgroundPattern;
 
+  const patternBackground = resolvedTheme === "light" ? PlaneBackgroundPattern : PlaneBackgroundPatternDark;
   const logo = resolvedTheme === "light" ? BlackHorizontalLogo : WhiteHorizontalLogo;
 
   return (
@@ -33,13 +25,11 @@ export const DefaultLayout: FC<TDefaultLayout> = (props) => {
             </Link>
           </div>
         </div>
-        {!withoutBackground && (
-          <div className="absolute inset-0 z-0">
-            <Image src={patternBackground} className="w-screen h-full object-cover" alt="Plane background pattern" />
-          </div>
-        )}
+        <div className="absolute inset-0 z-0">
+          <Image src={patternBackground} className="w-screen h-full object-cover" alt="Plane background pattern" />
+        </div>
         <div className="relative z-10 flex-grow">{children}</div>
       </div>
     </div>
   );
-};
+}

apps/admin/app/(all)/(home)/page.tsx

@@ -0,0 +1,62 @@
+"use client";
+
+import { observer } from "mobx-react";
+// components
+import { InstanceFailureView } from "@/components/instance/failure";
+import { InstanceLoading } from "@/components/instance/loading";
+import { InstanceSetupForm } from "@/components/instance/setup-form";
+// hooks
+import { useInstance } from "@/hooks/store";
+// components
+import { InstanceSignInForm } from "./sign-in-form";
+
+const HomePage = () => {
+  // store hooks
+  const { instance, error } = useInstance();
+
+  // if instance is not fetched, show loading
+  if (!instance && !error) {
+    return (
+      <div className="relative h-full w-full overflow-y-auto px-6 py-10 mx-auto flex justify-center items-center">
+        <InstanceLoading />
+      </div>
+    );
+  }
+
+  // if instance fetch fails, show failure view
+  if (error) {
+    return (
+      <div className="relative h-full w-full overflow-y-auto px-6 py-10 mx-auto flex justify-center items-center">
+        <InstanceFailureView />
+      </div>
+    );
+  }
+
+  // if instance is fetched and setup is not done, show setup form
+  if (instance && !instance?.is_setup_done) {
+    return (
+      <div className="relative h-full w-full overflow-y-auto px-6 py-10 mx-auto flex justify-center items-center">
+        <InstanceSetupForm />
+      </div>
+    );
+  }
+
+  // if instance is fetched and setup is done, show sign in form
+  return (
+    <div className="flex-grow container mx-auto max-w-lg px-10 lg:max-w-md lg:px-5 py-10 lg:pt-28 transition-all">
+      <div className="relative flex flex-col space-y-6">
+        <div className="text-center space-y-1">
+          <h3 className="flex gap-4 justify-center text-3xl font-bold text-onboarding-text-100">
+            Manage your Plane instance
+          </h3>
+          <p className="font-medium text-onboarding-text-400">
+            Configure instance-wide settings to secure your instance
+          </p>
+        </div>
+        <InstanceSignInForm />
+      </div>
+    </div>
+  );
+};
+
+export default observer(HomePage);

apps/admin/app/(all)/(home)/sign-in-form.tsx

@@ -0,0 +1,178 @@
+"use client";
+
+import { FC, useEffect, useMemo, useState } from "react";
+import { useSearchParams } from "next/navigation";
+import { Eye, EyeOff } from "lucide-react";
+// plane internal packages
+import { API_BASE_URL, EAdminAuthErrorCodes, TAdminAuthErrorInfo } from "@plane/constants";
+import { AuthService } from "@plane/services";
+import { Button, Input, Spinner } from "@plane/ui";
+// components
+import { Banner } from "@/components/common/banner";
+// local components
+import { AuthBanner } from "./auth-banner";
+import { authErrorHandler } from "./auth-helpers";
+
+// service initialization
+const authService = new AuthService();
+
+// error codes
+enum EErrorCodes {
+  INSTANCE_NOT_CONFIGURED = "INSTANCE_NOT_CONFIGURED",
+  REQUIRED_EMAIL_PASSWORD = "REQUIRED_EMAIL_PASSWORD",
+  INVALID_EMAIL = "INVALID_EMAIL",
+  USER_DOES_NOT_EXIST = "USER_DOES_NOT_EXIST",
+  AUTHENTICATION_FAILED = "AUTHENTICATION_FAILED",
+}
+
+type TError = {
+  type: EErrorCodes | undefined;
+  message: string | undefined;
+};
+
+// form data
+type TFormData = {
+  email: string;
+  password: string;
+};
+
+const defaultFromData: TFormData = {
+  email: "",
+  password: "",
+};
+
+export const InstanceSignInForm: FC = () => {
+  // search params
+  const searchParams = useSearchParams();
+  const emailParam = searchParams.get("email") || undefined;
+  const errorCode = searchParams.get("error_code") || undefined;
+  const errorMessage = searchParams.get("error_message") || undefined;
+  // state
+  const [showPassword, setShowPassword] = useState(false);
+  const [csrfToken, setCsrfToken] = useState<string | undefined>(undefined);
+  const [formData, setFormData] = useState<TFormData>(defaultFromData);
+  const [isSubmitting, setIsSubmitting] = useState(false);
+  const [errorInfo, setErrorInfo] = useState<TAdminAuthErrorInfo | undefined>(undefined);
+
+  const handleFormChange = (key: keyof TFormData, value: string | boolean) =>
+    setFormData((prev) => ({ ...prev, [key]: value }));
+
+  useEffect(() => {
+    if (csrfToken === undefined)
+      authService.requestCSRFToken().then((data) => data?.csrf_token && setCsrfToken(data.csrf_token));
+  }, [csrfToken]);
+
+  useEffect(() => {
+    if (emailParam) setFormData((prev) => ({ ...prev, email: emailParam }));
+  }, [emailParam]);
+
+  // derived values
+  const errorData: TError = useMemo(() => {
+    if (errorCode && errorMessage) {
+      switch (errorCode) {
+        case EErrorCodes.INSTANCE_NOT_CONFIGURED:
+          return { type: EErrorCodes.INSTANCE_NOT_CONFIGURED, message: errorMessage };
+        case EErrorCodes.REQUIRED_EMAIL_PASSWORD:
+          return { type: EErrorCodes.REQUIRED_EMAIL_PASSWORD, message: errorMessage };
+        case EErrorCodes.INVALID_EMAIL:
+          return { type: EErrorCodes.INVALID_EMAIL, message: errorMessage };
+        case EErrorCodes.USER_DOES_NOT_EXIST:
+          return { type: EErrorCodes.USER_DOES_NOT_EXIST, message: errorMessage };
+        case EErrorCodes.AUTHENTICATION_FAILED:
+          return { type: EErrorCodes.AUTHENTICATION_FAILED, message: errorMessage };
+        default:
+          return { type: undefined, message: undefined };
+      }
+    } else return { type: undefined, message: undefined };
+  }, [errorCode, errorMessage]);
+
+  const isButtonDisabled = useMemo(
+    () => (!isSubmitting && formData.email && formData.password ? false : true),
+    [formData.email, formData.password, isSubmitting]
+  );
+
+  useEffect(() => {
+    if (errorCode) {
+      const errorDetail = authErrorHandler(errorCode?.toString() as EAdminAuthErrorCodes);
+      if (errorDetail) {
+        setErrorInfo(errorDetail);
+      }
+    }
+  }, [errorCode]);
+
+  return (
+    <form
+      className="space-y-4"
+      method="POST"
+      action={`${API_BASE_URL}/api/instances/admins/sign-in/`}
+      onSubmit={() => setIsSubmitting(true)}
+      onError={() => setIsSubmitting(false)}
+    >
+      {errorData.type && errorData?.message ? (
+        <Banner type="error" message={errorData?.message} />
+      ) : (
+        <>{errorInfo && <AuthBanner bannerData={errorInfo} handleBannerData={(value) => setErrorInfo(value)} />}</>
+      )}
+      <input type="hidden" name="csrfmiddlewaretoken" value={csrfToken} />
+
+      <div className="w-full space-y-1">
+        <label className="text-sm text-onboarding-text-300 font-medium" htmlFor="email">
+          Email <span className="text-red-500">*</span>
+        </label>
+        <Input
+          className="w-full border border-onboarding-border-100 !bg-onboarding-background-200 placeholder:text-onboarding-text-400"
+          id="email"
+          name="email"
+          type="email"
+          inputSize="md"
+          placeholder="name@company.com"
+          value={formData.email}
+          onChange={(e) => handleFormChange("email", e.target.value)}
+          autoComplete="on"
+          autoFocus
+        />
+      </div>
+
+      <div className="w-full space-y-1">
+        <label className="text-sm text-onboarding-text-300 font-medium" htmlFor="password">
+          Password <span className="text-red-500">*</span>
+        </label>
+        <div className="relative">
+          <Input
+            className="w-full border border-onboarding-border-100 !bg-onboarding-background-200 placeholder:text-onboarding-text-400"
+            id="password"
+            name="password"
+            type={showPassword ? "text" : "password"}
+            inputSize="md"
+            placeholder="Enter your password"
+            value={formData.password}
+            onChange={(e) => handleFormChange("password", e.target.value)}
+            autoComplete="on"
+          />
+          {showPassword ? (
+            <button
+              type="button"
+              className="absolute right-3 top-3.5 flex items-center justify-center text-custom-text-400"
+              onClick={() => setShowPassword(false)}
+            >
+              <EyeOff className="h-4 w-4" />
+            </button>
+          ) : (
+            <button
+              type="button"
+              className="absolute right-3 top-3.5 flex items-center justify-center text-custom-text-400"
+              onClick={() => setShowPassword(true)}
+            >
+              <Eye className="h-4 w-4" />
+            </button>
+          )}
+        </div>
+      </div>
+      <div className="py-2">
+        <Button type="submit" size="lg" className="w-full" disabled={isButtonDisabled}>
+          {isSubmitting ? <Spinner height="20px" width="20px" /> : "Sign in"}
+        </Button>
+      </div>
+    </form>
+  );
+};